View Single Post
Old 6th March 2019
  #756
Lives for gear
 
galaydees's Avatar
 

It's very annoying that the eq filter shape changes so dramatically when switching between static and dynamic eq in the upper part of the frequency spectrum. Q is much narrower with a dynamic bell filter and cramps out of shape at nyquist. Shelf q just as bad. If you sweep a dynamic filter it gets narrower and narrower the higher you get. Impossible to make a fair comparison when toggling back and forth. Static filters don't share these properties.

Other dynamic eqs don't do this. Can somebody with the technical wherewithal break down the filter architecture?
Show replies