View Single Post
Old 29th October 2018
  #10
Gear Maniac
 

Quote:
Originally Posted by norfolk martin View Post
Nice analysis. As you point out later, the 1/2 wavelength difference between one path and the other won't provide full cancellation at 1KHz because of all the alternate paths, but it can be significant.

IMO, if each monitor is reasonably flat at the specified distance, trying to measure them together is asking for cancellation/reinforcement anomalies.
Not in the low frequencies. But to inspect the mid/high freqs I would measure them individualy and overlay the measurements to see if there are anomalies.