View Single Post
Old 13th July 2018
  #27
Lives for gear
 
Quetz's Avatar
 

Les, the ADI-2 is only a 2 channel device.

When RME talk about ADAT, they are not talking about 8 channels, they just mean you can use ADAT toslink ports to send 2 channels.

You don't have a multi-channel interface. You have a 2 channel interface.

So the solution put forward by Ells is exactly what you would do if you wanted to connect your devices.

It sounds as though you're a bit confused about the difference between toslink connections and adat as a protocol.

If I'm missing something obvious here then feel free to set me straight!