View Single Post
Old 21st March 2018 | Show parent
 
Gear Head
 
sadroyhibbert's Avatar
 
Smile

Quote:
Originally Posted by Unknown soldier View Post
Pulled out the bus module, didn't see any kind of adjustment for mono/stereo...but, a work around would be to take the bus outs and go back into a pair of input channels. Just want to to do parallel drum processing...
That would definitely work for parallel. The switches I was speaking of would be on the circuit board of the WU-8111 input modules; I'm including a photo of the switch on the WU-8101 module circuit board from the 8616, for reference if they are similar. If the switch is present and set to "off," flip it to "on," and the stereo image on the master bus should match that of the group buses when routed to from that channel.