View Single Post
Old 29th November 2017
Here for the gear


With now two towers completed an army of Sauron…. Oh wait different story…
In order to make the center tabletop I had to connect two slabs of beechwood. For this I used a dowel construction.
I drilled holes in both slabs at exactly the same height and position using a nifty dowel tool.
In order to make the join I again used construction glue and self-created clamps because I only had 15cm clamps and 120+ cm where way too expensive.
I used the plunge cut saw with guiderail again to make a trapezoid shape.
This causes the towers to tilt, pointing the 19 inch racks towards the user.
Attached Thumbnails
Created my own Studiodesk-20170905_173911.jpg   Created my own Studiodesk-20170905_191817.jpg   Created my own Studiodesk-20170905_192706.jpg   Created my own Studiodesk-20170906_160128.jpg   Created my own Studiodesk-20170906_171754.jpg