View Single Post
Old 28th November 2017
Here for the gear

Sticky Iron

With the side panel slabs in their final shape I used construction glue to create a 36mm side panel.
After drying I used a sander to sand of the excess glue. After that all the iron stuff was assembled to the slabs again.
I used insert nuts on the bottom so that I can screw in the paws and be able to make a few leveling adjustments if necessary in the end.
The paws are unused Besta paws from Ikea which where left over.
Attached Thumbnails
Created my own Studiodesk-20170812_133553.jpg   Created my own Studiodesk-20170813_205734.jpg   Created my own Studiodesk-20170814_172658.jpg