View Single Post
Old 28th November 2017
  #5
Here for the gear
 

Beechboy

So for the tabletop and the monitor top I used 28mm beechwood which I bought at the local hardware store.
For both towers I decided to make an inlay cut in the inner side panel slabs and use a mitre cut (diagonal) on the beechwood to make it fit.
The pictures say it all.
Attached Thumbnails
Created my own Studiodesk-20170726_203133.jpg   Created my own Studiodesk-20170726_211755.jpg   Created my own Studiodesk-20170726_214001.jpg