View Single Post
Old 17th August 2016
Lives for gear
ponzi's Avatar

I was having a noise problem on my Neumann TLM103. I checked with a few folks who do Neumann repair. All great guys. Alone among them, however, Dave mentioned that one issue could be that the innards had gotten disconnected from the mic body. I decided I could check that out. I took it apart and noted that the ground was firmly in place. I did unplug and re-seat the one plug in connection on the circuit board. This, or my general disassembly, fixed the noise problem. I appreciated that he gave me something I could check myself without having to send it in. Well, he's first on my list when I do need to send a mic in for a repair or a mod.