View Single Post
Old 20th March 2016 | Show parent
  #62
Lives for gear
 

Quote:
Originally Posted by goldi View Post
Why don't you start by using the Mk2 as ADAT only -- in and out of the MK 3. that way you will do everything inside the MK3 interface software and not have to use 2 different interface panels.

If the "main outs" are unique (and not a mirror of 1&2), then just monitor those and use 8 outs from each unit for your summing stems. If you need 2 more, then do the "trick": it may work on the Mk3 as well -- use those "sends" as your monitors and the front panel as your main summing returns (which you are doing anyway). then borrow the main outs for another pair of outputs for summing.

Back to the pre problem: if your signal is too hot and you can't bypass the front preamps, go into 1 & 2 TRS inputs on the rear. There are definitely no preamps on the back.

Nice one

As soon as i get time in the week i will try all this out so thanks for all your info goldi.