View Single Post
Old 16th January 2007
  #2
Gear Head
 
Sukks2bu's Avatar
 

As far as I know, the speakon can come in a few veriaties. Standard would have only 1-pair of wires ( +1 and -1 positive and negative) therefore, you would cut one end off the speakon that you want to attach to the ns10, and put the +1 on the positive and the -1 on the negative.

You could have up to 4 pairs of wires if its an nl8 conector. this is used for a full pa with subs and horns where you would have +1 and -1, +2 and -2, etc. If this is the case, Im not totally sure, but you could use just the +1 and -1 pair only and attach it to your ns10.

I hope this helps.