View Single Post
Old 13th January 2015
Originally Posted by hfdz0 View Post
Below are pics of the wires from the original cab with the "extensions" I was trying to describe above. Also, 2 pics of the barrel-like orifices in the amp - a birds eye view and another view so you can see the lengths of them.
Those are a type of push-on connector, similar to ones used in some automotive applications. The ones on the board are males, the wires have the female sockets. If they're loose (and they do get loose if taken apart frequently) you need to tighten the females by squeezing them gently with a pair of needle nose pliers to squash them just a teensie-eensie amount. Do Not oversquash them, be careful. Squeeze them just enough to make them click into place on the male posts, rather than fitting loosely.