View Single Post
Old 5th January 2007
  #15
Gear Head
 
Spikeh's Avatar
 

You're a star, thank you very much. I'll see where I can go from here!
Quote:
Originally Posted by Barish View Post
So long as the current rating of the feeds are good enough for your desk, and you make sure that the right voltage goes to right pin on the socket, then you can test the desk with it to make sure it works. The +/- 1V excess on DC rails won't burn your desk. But once you made sure that it is working, you'd have to get it readjusted to +/- 17V, for otherwise the excess may mess up the biasing in some parts of the circuit and cause inconsistencies during operation.

B.