The No.1 Website for Pro Audio
Mackie Big Knob Studio+

Mackie Big Knob Studio Plus

3.75 3.75 out of 5, based on 3 Reviews

The Studio + is the biggest and most featured of the Mackie Big Knob range.


4th December 2018

Mackie Big Knob Studio Plus by Arthur Stone

Mackie Big Knob Studio+

Big Knob: The Mackie Big Knob Studio + is the biggest and most featured of the Big Knob range: the 'MBKS+' can act as a small studio centrepiece (doing everything except: computer, monitors, instruments) and also has a wider range of studio uses where only parts of it's feature set is utilised. There's a USB audio interface; monitor control section; headphone amps and talkback mic; a range of inputs inc. 2 premium Onyx preamps; and comprehensive routing options that will ensure the MBKS+ connects to a typical small studio and gear.

Mackie Big Knob Studio+-mbkangle.png

The layout and ergonomics are very good: tilted top; clear, spaced and illuminated buttons; the knobs are great quality. The build-quality is rugged. The steel sheet does not clang when buttons are clicked. The stable weight gives it a nice solid feel on the desk but it's still light enough to fit in a backpack or case for portable studio facilities or diverse audio roles.

Mackie have long had a good reputation in my book. After years of reading their products reviewed it seems they have a great deal to offer in terms of engineering design and manufacture, and audio know-how. I was looking forward to reviewing the MBKS+ and although, in general, they are not usually mentioned in high-end discussions (more utilitarian maybe) I was expecting gear that could deliver a solid performance. I wasn't disappointed.

Mackie Big Knob Studio+-mbkrear.png

Quote:
Features:
4 input sources: (2 x mono or 1 x stereo pair Onyx preamps/DI's; 2 stereo pairs of line in with gain; stereo USB input from DAW or computer).
3 monitor outs (A,B,C) all with independent trim.
Big Knob monitor controller with Mute, Dim and Mono buttons.
All of the selection buttons are backlit in different colours.
Decent metering for the money, clear and bright, 16-segments but visually obscured by the monitor dial.
Comprehensive routing, for the money; useful for setting up monitor mixes to the two independent headphone outputs (or guerilla studio routing).
Mackie Big Knob Studio+-mbkfront.png

Quote:
Specs:
Frequency Response
Unity gain, +4 dBu input
All inputs: ±0.5 dB, 20 Hz – 20 kHz
All outputs: ±0.5 dB, 20 Hz – 20 kHz
Noise Characteristics
150 ohm terminated, 22 kHz bandwidth
Mic inputs to outputs (EIN): < –125 dBu RMS, A-weighted
Line inputs to outputs: < –90 dBu RMS, un-weighted
Distortion (THD+N)
Unity gain, 1 kHz @ +4 dBu input, 80 kHz bandwidth
All inputs to outputs: <0.01%, un-weighted
Crosstalk (between left and right channels)
Unity gain, –1 dBFS input
Mic inputs to outputs: < –60 dB at 1 kHz
Line inputs to outputs: < –60 dB at 1 kHz
Attenuation
Muted: –60 dB
Dim: –20 dB
Maximum Levels (before clipping)
All inputs: +22 dBu
All outputs: +22 dBu
Input Type
Female XLR balanced/ unbalanced
Female 1/4" balanced / unbalanced
Female 1/8" unbalanced
Output Type
Female 1/4" balanced / unbalanced
USB Format
USB 2.0, 24-bit, 192 kHz
Power Requirements
Universal Power Supply:
100 – 240 V~ 50/60 Hz 0.75A
Physical Dimensions and Weight
Height: 3.2 in / 81 mm
Width: 11.9 in / 302 mm
Depth: 6.8 in / 173 mm
Weight: 4.6 lb / 2.1 k

Price: UK £252/ Euro 266/ US $300
Approx. retail prices at review date; MRRP is higher.


Software: No software mixer (none needed, thankfully) and a simple Windows-style options and setting page for audio and USB streaming quality. The cue functions, controlled by software with many interfaces, are hardware controlled and this bodes well for non-computer use – as a studio tool for tracking/monitoring or routing hardware instruments.

I didn't check out the bundled Tracktion software but I started out with Mackie Tracktion in the 00's and I really enjoyed using it; I think it's improved a lot over 15 years too.

Mackie Big Knob Studio+-mbksource.png


In Use: I started by downloading the Mackie drivers (smooth process) then simply plugged the unit in to mains power and connected a USB cable. Up-and-running.

First thing I noticed was everything got loud; there's a healthy amount of gain available relative to the volume dial. I think this bodes well for a diverse range of connected gear – plenty of juice available.

Very easy to get started with the controls (without the manual); straightforward with good legends. The feature set is very good with lots of routing possibilities – functionally like a mini-mixer without faders.

The monitor section is straightforward and well laid out. The large monitor dial – the 'Big Knob' – does a good job; similar to the dial in the KRK Ergo. The 3 monitor outs are a rare luxury (you'll just need to buy more monitors eh?).

The headphone amps sounded very good; again plenty of gain on tap with AKG K702, ADAM SP-5, and Apple buds, and no gain-bunching issues. Impressed at sonic balance and dynamics and lack of harshness.

I think the circuitry is low-noise and clear despite some flattering colouration; the workflow is great and not distracting. Quick, instant learning curve. No menu diving; control per function.

The Onyx pre's stood out from similarly-priced interfaces in the width of the preamp's 'sweet spot' relative to gain dial and performance level; there's more room for manoeuvre and capturing dynamics.

The hardware is solid and sits on the desk firmly; the smooth metallic surface gets pleasantly warm to the touch but not hot. The monitor dial – the Big Knob – is surprisingly warm and could potentially be unpleasant in hotter weather. I didn't want to rest my hand on it for long. Tested in UK mild Autumn around 50 - 60 degrees Fahrenheit (10 - 15 C).

Mackie Big Knob Studio+-mbkmonitor.png

Making music with the Mackie Big Knob Studio+: As usual I felt inspired by the gear to make some music. The obvious musicality is going to come from the Onyx preamps so I though - vocal and guitar with mic; and some synths via line inputs (non-Onyx).

I connected a Waldorf Streichfett (w/Sunfish mod) polysynth for pad to inputs 3-4 and a Moog Subphatty monosynth into input 2 DI for bass duties. I connected a Shure SM58 dynamic mic plus Simply Sound SS1 'lifter' into input 1 which also supplied phantom-power. I'd swap the DI Moog input for the electro-acoustic Taylor 414ce.

Mackie Big Knob Studio+-mbkside.png

I opened a session in the DAW (Reason) and came across the first limitation of the MBKS+: only 2 input channels. This marks the MBKS+ as a small studio device although the limitation is perfectly suited to this environment and production style – usually overdubbing tracks. The 4 output channels enable a stereo pair (or 2 mono) loop IO whilst still monitoring on the other stereo pair.

I cooked up some beats in Reason and tracked a simple acoustic guitar motif – a repeating riff with a chord change. I monitored on headphones assisted by the 'direct monitoring' dial on the MBKS+. The Taylor was DI'd and sounded awesome via the Onyx preamp – first take. The Taylor can get squawky when DI'd through an inferior preamp but the MBKS+ created a faithful and enhanced reproduction. Cleanly enhanced. Next track – Moog bass. This worked really well with the Onyx pre's detailing the desireable characteristics of the Moog sound. Next a Moog 'cello' and synth strings from the wonderful Waldorf Streichfett (modded by Gearslut Cozmik Producer). The vocal and double-takes and harmonies finished off the track.

The final track, mixed ITB in Reason DAW, is here: YouTube and it's also featured in the video review:



Mackie Big Knob Studio+-mbkio.png
Gearslutz Score.

Sound quality: 5/5 For the money this is very good. The 2 Onyx preamps are a pleasure to use with a wide 'sweet spot' for performance.
Ease of use: 4/5 Great ergonomics and clear buttons and little mechanical noise. The latency was quite high with the Mackie drivers but using the cue mix seemed to make the track sound sync'ed well enough. It's robust and portable - so with a laptop and mains power source it can cover a lot of territory. The unit is another source of heat in a hot environment; sometimes it felt too warm to be pleasant when 'riding' the dial.
Features: 4/5 Everything you'd need but limited to 2 channel input and this restricts potential applications.
Bang-for-buck: 5/5 Neat, capable, fully-featured audio interface; robust, well-designed and manufactured. I was surprised at the price; great value. Tracktion software is a bonus.

Mackie Big Knob Studio+-mbktop.png

Final thoughts: I would have loved something like the MBKS+ when I was starting out; even today it's a charm to use and is capable of solid audio performance in capturing a performance. The design and ergonomics allow the user to focus on music-making at good audio quality. If audio engineering is more your focus then this is a great unit to learn with until you recognise which higher-end gear you really need and even then the MBKS+ will still perform many utility roles (e.g. synth/fx routing). I can also see the audio quality and IO routing of the MBKS+ being useful to people without a computer in an all-analogue environment.

Mackie Big Knob Studio+-nightflowerl.jpg


Credits and links:

Big Knob Series | Mackie
Mackie Big Knob Studio+ manual.

Night-blooming cereus By Aswin KP - Own work, CC BY-SA 4.0, File:Night-blooming cereus.jpg - Wikimedia Commons

Mackie photos used with permission; additional art by Arthur Stone.

Attached Thumbnails
Mackie Big Knob Studio+-mbkangle.png   Mackie Big Knob Studio+-mbkfront.png   Mackie Big Knob Studio+-mbkio.png   Mackie Big Knob Studio+-mbkmonitor.png   Mackie Big Knob Studio+-mbkrear.png  

Mackie Big Knob Studio+-mbkside.png   Mackie Big Knob Studio+-mbksource.png   Mackie Big Knob Studio+-mbktop.png   Mackie Big Knob Studio+-nightflowerl.jpg  
Last edited by Arthur Stone; 4th December 2018 at 09:54 PM..

  • 4
20th August 2020

Mackie Big Knob Studio Plus by Timothylawsnyder

  • Sound Quality 1 out of 5
  • Ease of use 2 out of 5
  • Features 4 out of 5
  • Bang for buck 1 out of 5
  • Overall: 2
Mackie Big Knob Studio+

Friends,

I wanted to share my experience with the Mackie Big Knob Studio. My experience would amount to an "avoid it at any cost--even if free" review. Here is why; the issues are many, as you will see.

The first sign of trouble was the rollout: the product arrived several months following the announced release date.

Fresh out of the box, mine had a static in the left speaker that would occur when one turned the Big Knob. It happened every time one turns the Knob throughout its rotational path. I kept the product, thinking that this would work itself out. Big mistake.

The problem continued. Two other huge issues: On occasion, when I recycled the power off and on, I would receive this horrible, loud rush of white noise, continuously, out of the (again) left speaker. Arguably worse, when I shut the unit off, a loud "blurpt" sound, followed by an all-frequency burst of noise, got blasted through both speakers.

I unfortunately was too busy to return the unit. When I tried, it was beyond its warranty expiration. The Guitar Center directed me to Mackie. A Mackie rep and I had a nice exchange, with him reminding me that the user is required to respond within the frame of the warranty, but adding that they would see what they might do, if I shared my serial number and receipt.

The rep acknowleged that they knew of the off/on problem, suggesting I power down my speaker before shutting the Big Know off--otherwise I will get a pop, followed by a rushing noise if I powered up soon after shutting down. The rep claimed this to be common practice. (I understand that, but how many of us do it, especially when the unit requires occasional reboots, as does this one?)

I ran the tests they asked me to and determined that the unit retained its problems. The rep got back to me and reported that they would not be able to help me because I was too far out of the warranty period (just shy of 6 extra months).

Today, just past my second year of using the unit, it died. Completely. No audio.

So, we have a feature-rich, seemingly beautiful product that, at least in my "n equals one" case, had a noisy Knob; an inexplicable, frequent, potentially damaging white noise surprise; a potentially speaker-damaging off switch, of which the company is aware; and a quick death. Hence my "avoid at all costs" warning.

All the best to each of you,
Tim

1 week ago

Mackie Big Knob Studio Plus by twecomm

  • Sound Quality 4 out of 5
  • Ease of use 5 out of 5
  • Features 5 out of 5
  • Bang for buck 5 out of 5
  • Overall: 4.75
Mackie Big Knob Studio+

I have had one of these Big Knobs for about 2 years now. Main reason I bought it was it had a "mono" button for ability to hear your mix in mono, which I feel is an important feature that is missing on many similar type and brands of monitor units. This Big Knob seems to have plenty of features and sounds good, however my main issue that I find most annoying, is the large knob main monitor level pot does not track accurately L to R level wise at low monitor volumes ( below 9 O'Clock ) Same goes for both headphone level pots. When I discovered this within the first few minutes of checking it out, I called Mackie Tech Support. No good reply or solution to my complaints.
Thought it may be possible to replace the main pot, so took it apart only to discover that it would be most difficult due to physical constraints and surface mount design of the internals.
So, I broke out oscillator and level meter to see how far off it was and where it started to accurately track in rotation. It was my experience that accurate tracking for the big knob and headphone pots did not begin to track till you reached at least 9:00 O'Clock on the dial. Since overall stereo gains for each of the 3 monitor sources can be easily trimmed on the unit, I found I could create a workable minimum monitor setting where levels tracked accurately by tweeking trims on the Big Knob, and gains on my Gelelec's. I put an arrow shaped tape mark on the point of where things started tracking and established that mark ( apx. 9:30 on the knob ) as my new minimum level point. What Mackie needs to do is use a much higher quality tighter spec pot(s) for main and phones monitor levels, or use a stepped 1% resistor type control for resolving this tracking issue. This is a good unit for the money and offers many features but does have this level issue.

  • 1
 
Review Tools
Search this Review
Search this Review:

Advanced Search