SSL Nucleus - official info released - Page 63 - Gearslutz
The No.1 Website for Pro Audio
SSL Nucleus - official info released
Old 13th March 2018 | Show parent
  #1861
Lives for gear
 
sigmatibet's Avatar
 
3 Reviews written
🎧 15 years
Quote:
Originally Posted by [email protected] ➡️
No sorry, they can’t
OK got it. Thank you
Old 14th July 2018
  #1862
Here for the gear
 
spiritguitar's Avatar
 
🎧 10 years
Are there any Nucleus owners out there who are using it successfully as a controller with Digital Performer?

I asked SSL and MOTU if either had a Profile for it, but no luck.

Works great for me with Logic Pro X, but not so great with DP.

Last edited by spiritguitar; 19th July 2018 at 07:44 PM..
Old 8th August 2018
  #1863
Here for the gear
 
Hello,
I purchased a second hand Nucleus but still wondering how to make it work.
I am running Logic on a Mac Pro and Mac book pro running on OS X 10.10.5 Yosemite.
When I launch NucleusRemote I get the message that no java 1.5+ is not available. I installed the very last java version though.
I can't find anywhere Java SE 5 legacy archive. Can't find any similar problem on the forums.
Help would be very appreciated!
Thank you
JC
Old 8th August 2018 | Show parent
  #1864
Lives for gear
 
uptheoctave's Avatar
 
🎧 15 years
Quote:
Originally Posted by jcdeep ➡️
Hello,
I purchased a second hand Nucleus but still wondering how to make it work.
I am running Logic on a Mac Pro and Mac book pro running on OS X 10.10.5 Yosemite.
When I launch NucleusRemote I get the message that no java 1.5+ is not available. I installed the very last java version though.
I can't find anywhere Java SE 5 legacy archive. Can't find any similar problem on the forums.
Help would be very appreciated!
Thank you
JC
Contact SSL support- they are pretty good.
Old 8th August 2018 | Show parent
  #1865
Lives for gear
 
uptheoctave's Avatar
 
🎧 15 years
Quote:
Originally Posted by spiritguitar ➡️
Are there any Nucleus owners out there who are using it successfully as a controller with Digital Performer?

I asked SSL and MOTU if either had a Profile for it, but no luck.

Works great for me with Logic Pro X, but not so great with DP.
You will need to alter a MCU/Logic profile to suit.
Old 17th August 2018 | Show parent
  #1866
Here for the gear
 
spiritguitar's Avatar
 
🎧 10 years
Quote:
Originally Posted by uptheoctave ➡️
You will need to alter a MCU/Logic profile to suit.
Thanks Octatonic for your reply. Since Nucleus 'just works' with Logic I decided to migrate most of my projects over from DP. The path of least resistance.
Old 11th December 2018 | Show parent
  #1867
Here for the gear
 
🎧 5 years
Hello Jim,
I purchased a used Nucleus not long ago and I really like it. I just have one question. As far as plug-in control goes does it work across the board for all features of all plug-ins? I've been seeing that some of the features in Logic's stock plug-ins as well as some of the Waves plug-ins aren't assigned to the pots/faders. Is this a configuration thing or am I missing something? Please let me know and thanks.
Old 13th December 2018
  #1868
Lives for gear
 
Avantmidi's Avatar
 
🎧 5 years
@ Jim : can you please confirm a Nucleus v1 with the latest firmware Will work with OS Mojave.
Whitout usb audio interface support ofcourse.
Thanks a million
Old 4th January 2019 | Show parent
  #1869
Lives for gear
 
Avantmidi's Avatar
 
🎧 5 years
Very happy with my Nucleus V1.
Works perfectly with OS Mojave via usb-c ethernet adapter. No audio interface funtionality, but I do use the preamps and headphone monitoring. Nice stuff

So I confirm it works with the V2 drivers, Latest IPmidi and correct Mac OS midiport settings at the audio/midi utility enabling the ipmidi Ports.

I got my v1 modded with the V2 black sidepanels and other fadercaps ordered from SSL directly.
Attached Thumbnails
SSL Nucleus - official info released-35f0af73-3c58-4e60-a130-5f88dfadf8ae.jpg   SSL Nucleus - official info released-4a0c9e08-af8c-44f2-8cac-95d02a9c94a1.jpg   SSL Nucleus - official info released-10be4225-466b-4ac6-b153-c367a5e04330.jpg  
Old 23rd May 2019
  #1870
Gear Head
 
🎧 5 years
Hi,

Im a new user of Nucleus v1 with Cubase 9.5 and SSL Sigma. Its working perfectly for me.

I only have a doubt, is there any Cubase 9.5 profile for the Nucleus?

Maybe if there is a totally compatible profile, if you select a track with the mouse, automatically the banks move to that position in the Nucleus. Is that possible?
Old 4 weeks ago | Show parent
  #1871
Gear Maniac
 
🎧 10 years
Hi People, I have Nucleus Mk1 and cant seem to make it work on my Hackintosh.
On windows 10 (same comp) it is working fine, but on HAckintosh Mojave osx nope. I cant seem to find it my Nucleus Remote app.. any suggestions? I connected it directly in my comp.

Also, i need one fader to replace... I tried trough SSL official page and it is a drag, i cant order just fader cause it is 36, and limit is 38

https://www.youtube.com/watch?v=xOzjlbagqLI
Old 4 weeks ago | Show parent
  #1872
Lives for gear
 
ArcCirDude's Avatar
 
🎧 15 years
The built in convertors won’t work on Mojave. The last OS the MkI worked with is Snow Leopard, I believe. As far as the Remote app, you’ll need to update it to the latest version.
Old 4 weeks ago | Show parent
  #1873
Gear Maniac
 
🎧 10 years
I dont need audio card, just daw controler. But i cant conect it. I tried everything. Nuc is conected directly to computer. And i disconected wifi. Which version of remote app should i download, v1 or v2?
Old 4 weeks ago
  #1874
Gear Maniac
 
🎧 10 years
The ssl web is very bad. Support for older devices dont exist. The informations are very confusing.
Attached Thumbnails
SSL Nucleus - official info released-ff3c808b-781f-4bfc-aedd-03c456dd9345.jpg  
Old 4 weeks ago | Show parent
  #1875
Gear Maniac
 
🎧 10 years
Only way it connected when i connect nucleus to my internet router and my comp is connected with wifi of the same router. Is that weird?!? But when i connect nuc directly in my comp it wont connect, with wifi turned on and off, same thing.
I dont get this. I cant believe how they complicated it so much
Old 4 weeks ago | Show parent
  #1876
Gear Guru
 
Jeezo's Avatar
 
🎧 10 years
Quote:
Originally Posted by tex viler ➡️
Only way it connected when i connect nucleus to my internet router and my comp is connected with wifi of the same router. Is that weird?!? But when i connect nuc directly in my comp it wont connect, with wifi turned on and off, same thing.
I dont get this. I cant believe how they complicated it so much
If you only need daw control check their new controller
Old 4 weeks ago | Show parent
  #1877
Gear Maniac
 
🎧 10 years
Are you nuts? 🤷‍♂️🤡
I want this one to work, it’s payed lots of money. Their support is a subject to it self. Anybody have some suggestion?
Old 4 weeks ago | Show parent
  #1878
Lives for gear
 
Septic's Avatar
 
🎧 10 years
Quote:
Originally Posted by tex viler ➡️
Are you nuts? 🤷‍♂️🤡
I want this one to work, it’s payed lots of money. Their support is a subject to it self. Anybody have some suggestion?
I bought a preconfigured Netgear router from SSL for around 300 euros when I had the Nucleas a few years ago. I now have avid artist mixers on the same router.

Sold the SSL due to the bad metering in logic, crappy profile system with the smartmedia card and overall BS like you stated in a previous post with bad software support.
Old 4 weeks ago | Show parent
  #1879
Lives for gear
 
Analogue Mastering's Avatar
 
🎧 10 years
Quote:
Originally Posted by tex viler ➡️
Only way it connected when i connect nucleus to my internet router and my comp is connected with wifi of the same router. Is that weird?!? But when i connect nuc directly in my comp it wont connect, with wifi turned on and off, same thing.
I don't get this. I cant believe how they complicated it so much
You need a network https://en.wikipedia.org/wiki/Ethernet_crossover_cable

for peer2peer
You also need to make sure they have the same ip range, either being
192.168.x.xx when both connected to a DHCP server (i.e. router)
or local adress 169.168.x.xxx when connect peer <> peer (without DHCP server)

It's not complicated, but you need to invest a bit in basic networking knowledge.
Old 4 weeks ago | Show parent
  #1880
Gear Maniac
 
🎧 10 years
I know some basics and i manege to conect it two years ago but it was on different computer.
Can you give me some more detail about this pls?

Last edited by tex viler; 4 weeks ago at 02:36 PM..
Old 3 weeks ago | Show parent
  #1881
Gear Maniac
 
🎧 10 years
Finally NUC is online again.
A guy from ssl Zendesk manage to help me and now i got it working, wifi and nucleus both online..

One more thing i need, i cant remove usb sound card drivers (Mojave OS)
I wanted to try install it
Searched everywhere, cant fint it..
Old 3 weeks ago | Show parent
  #1882
Lives for gear
 
Avantmidi's Avatar
 
🎧 5 years
I really want to get it working. Could you please post the steps needed?
Old 3 weeks ago | Show parent
  #1883
Gear Guru
 
Jeezo's Avatar
 
🎧 10 years
Quote:
Originally Posted by tex viler ➡️
I dont need audio card, just daw controler. But i cant conect it. I tried everything. Nuc is conected directly to computer. And i disconected wifi. Which version of remote app should i download, v1 or v2?

Quote:
Originally Posted by tex viler ➡️
Are you nuts? 🤷‍♂️🤡
I want this one to work, it’s payed lots of money. Their support is a subject to it self. Anybody have some suggestion?
You said you don't need an audio card but a daw controller .... no need to stress , i was pointing a possible option for you /.....
📝 Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 295 views: 66824
Avatar for anguswoodhead
anguswoodhead 26th March 2013
replies: 66 views: 13740
Avatar for Crown Loops
Crown Loops 31st July 2014
replies: 1296 views: 168809
Avatar for heraldo_jones
heraldo_jones 1st February 2016
replies: 608 views: 52430
Avatar for drfonta
drfonta 4 hours ago
Topic:
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump