Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   So Much Gear, So Little Time (https://www.gearslutz.com/board/so-much-gear-so-little-time/)
-   -   Need an amp to power a pair of JBL SRX728 (https://www.gearslutz.com/board/so-much-gear-so-little-time/441251-need-amp-power-pair-jbl-srx728.html)

bumface 18th November 2009 08:04 PM

Need an amp to power a pair of JBL SRX728
 
What would you guys suggest to power a pair of JBL SRX728 subs? I was thinking either of these :

Crown MA5000VZ (1 SRX728 on each chanel at 1,700 wpc into 4 ohms -- 20hz-20khz)
2 QSC PLX2502 (1 SRX728 on each bridged PLX2502 at 2,500 watts into 4 ohms -- 1khz)
2 Crown K2 (1 SRX728 on each bridged K2 at 2,500 watts into 4 ohms -- 1khz)
Camco Vortex 6 (1 SRX728 on each channel at 2,100 wpc into 4 ohms -- 1khz)
Lab Gruppen LAB4000 (1 SRX728 on each channel at 2,100 wpc into 4 ohms -- 20hz-20khz)

Would running each SRX728 sub on a bridged QSC RMX2450 be good or not?