Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Low End Theory (https://www.gearslutz.com/board/low-end-theory/)
-   -   002 and 96k (https://www.gearslutz.com/board/low-end-theory/35759-002-96k.html)

superburtm 21st June 2005 09:28 AM

002 and 96k
 
So am I hearing right that the DIGI 002 cannot record 96k sampling rate via the adat lightpipe?

DrDeltaM 21st June 2005 09:53 AM

Indeed, Digidesign does not support S/MUX. It doesn't support it either on the HD interfaces btw.

superburtm 21st June 2005 10:01 AM

wow...that's sad! Thanks for the info!

SUPA FROST 21st June 2005 10:04 AM

Yeah, Unfortunately thats true. It only goes up to 48k on the light pipe section. I had one and I sold it and got a MOTU HD192. The MOTU is a little cheaper than the 002 and sounds way better. If sample rate is your main concern, then maybe you should look into a better converter box. BTW, in my opinion, the 002 doesn't perform too well at 96k either.

superburtm 21st June 2005 10:13 AM

But if I get a better converter box for use with the 002 am I stuck with only being able to get 2 channels in at a time at 96k via the spdif inputs?

teamdresch 21st June 2005 10:42 AM

Correct me if I'm wrong here, but I think you can get an EXTRA pair in at 96k via S/PDIF.

maskedman72 21st June 2005 10:47 AM

Quote:

Originally Posted by superburtm
But if I get a better converter box for use with the 002 am I stuck with only being able to get 2 channels in at a time at 96k via the spdif inputs?


that is correct.

superburtm 21st June 2005 11:05 AM

cool thanks all!

jkthtyrt