Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Post Production Forum (https://www.gearslutz.com/board/post-production-forum/)
-   -   RMU, You and the Loudness Re-render (https://www.gearslutz.com/board/post-production-forum/1323909-rmu-you-loudness-re-render.html)

iluvcapra 31st August 2020 09:43 PM

RMU, You and the Loudness Re-render
 
Anybody have any thoughts or experience on the Loudness re-render format? The manual says:

Quote:

2.2 New re-render options: 7.1.4 and Loudness

The re-render output matrix includes two new layouts: 7.1.4 and Loudness. These layouts are available when you create and map a re-render while configuring the re-render output matrix. The layouts appear as options in the Layout drop-down menus in the Re-renders and Properties windows.
Use the Loudness layout (which is a 5.1 layout) for loudness measurements. For example, run the loudness re-render into the DAW if you are using an external loudness plug-in. This will be more accurate than running a standard 5.1 re-render into an external plug-in.
Is anyone doing this? If I'm delivering a 5.1, and that is going to QC, that's what I want to be metering right? What's the idea with the Loudness re-render?

quadraphonics 31st August 2020 10:14 PM

I haven't had a chance to play with this yet, but I don't know why the Loudness re-render in 5.1 mode would be more accurate than using the 5.1 re-render that you are actually sending off to QC.

Randall


Quote:

Originally Posted by iluvcapra (Post 14944723)
Anybody have any thoughts or experience on the Loudness re-render format? The manual says:



Is anyone doing this? If I'm delivering a 5.1, and that is going to QC, that's what I want to be metering right? What's the idea with the Loudness re-render?


rcutz 4th September 2020 12:55 AM

I did check it against a live 5.1 re-render and both match. The 5.1 meter was a instance of VisLm with the netflix 5.1 preset.
I was using the loudness re-render option