Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Studio Building / Acoustics (https://www.gearslutz.com/board/studio-building-acoustics/)
-   -   help with acoustic measurement (https://www.gearslutz.com/board/studio-building-acoustics/1321532-help-acoustic-measurement.html)

Mauroots 10th August 2020 11:08 PM

help with acoustic measurement
 
9 Attachment(s)
Hello friends, I have recently conditioned a room in my house as a control room for mixing purpose with the following measures:

2.90 wide
2.92 depth
and the ceiling goes diagonally and goes from 2.35 to 2.00 meters

Unfortunately the speakers are located on the highest wall of the room and not vice versa, because on the shorter wall I have a window and a door.

I have the Adam a7x + Adam sub 8 and I have made seven acoustic measurements of the place from the listening point only.
first I measure the left speaker alone, then the right speaker alone, then the sub alone, then the left speaker + sub, then the right speaker + sub and finally all three together.

I attach the screenshots of the measurements, RT60 Top and the waterfall below

I need help to interpret these measurements and to know where to start to work on the acoustics of the room. I'll be very greatful

johannburkard 13th August 2020 11:46 PM

You can see on the waterfall how the decay times go up from about 1 kHz downwards. The problem is there won't be much space left for you in the room after you add treatment.

You can start by filling up every surface 30 cm deep with for example Rockwool and seeing where that takes you.

Also, let me get this straight: You have a wall that's 2 m tall and there's a door in it? Is that a building designed for midgets?