Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Electronic Music Instruments and Electronic Music Production (https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/)
-   -   Logic Pro X - s61 keyboard midi out / usb out (https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/1316798-logic-pro-x-s61-keyboard-midi-out-usb-out.html)

elmerfud123 29th June 2020 09:30 PM

Logic Pro X - s61 keyboard midi out / usb out
 
Hi,

I am trying to figure out how to assign the midi in and out for my NI s61 keyboard so I can go out the Midi DIN's to my hardware synth and control komplete kontrol etc inside of logic via my usb at the same time. I have the synth working when the usb is unplugged, I also have it working with komplete kontrol standalone - but when I open logic I can't figure out how to assign the routing so this should work. Seems like it should be pretty straight forward.

Thanks!

scottfrost 29th June 2020 09:52 PM

Is this the MK2? If so you have to do it through control editor and and make it a template with your desired midi channel, I would recommend making 16 with one for each channel. Also note you need to disconnect the USB cable when using hardware gear in stand alone mode.

Dumbest design decision ever.

elmerfud123 29th June 2020 10:22 PM

Thanks Scott,

Yes it's the Mk2 S61 - Does anyone have instructions for using complete editor - I have it open but am really unclear as to how to save or change the channels and how to then load 16 templates into logic, or how that would work.

Thanks