Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Post Production Forum (https://www.gearslutz.com/board/post-production-forum/)
-   -   Room measurement with REW (https://www.gearslutz.com/board/post-production-forum/1315700-room-measurement-rew.html)

Badaboom 20th June 2020 05:24 PM

Room measurement with REW
 
Hi all,

I'm new to REW and have a few questions.

My mix room is equipped with PT Ultimate and Avid MTRX with Pro Mon. My REW rig is a portable Windows 10 laptop with the Roland Octapre soundcard. My monitors are JBL 708i for L-C-R and 705i for surrounds. Mics are Beyer MM1 with calibration files for 90 and 180 degrees position. I use 90 degree, mic is facing up (ceiling).

In order to have the Pink/Sweep from REW played on my monitors, i have:

- Output 5 from Octapre soundcard plugged into input 5 on MTRX

- In Protools, on a mono audio channel, i have input assigned to input 5 of MTRX and Output is set to each of the respective surround channel as i take my measurement (L-R-C-Lfe-Ls-Rs).

As recommended in the manual, Pink volume is set to 75dB via SPL meter.

I usually take 4 measurements (mic placed at 4 different locations in the mix room) per channel, so 24 total.

Will the set up above yield proper measurements ?

Does REW offer mutli microphones measurements ?

Thanks