Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Music Computers (https://www.gearslutz.com/board/music-computers/)
-   -   Connect Analog EQ/Comp to Logic (https://www.gearslutz.com/board/music-computers/1315650-connect-analog-eq-comp-logic.html)

Dread 20th June 2020 05:40 AM

Connect Analog EQ/Comp to Logic
 
Im a dumb-ass!
For the love of god I can not figure out how to get this to work.


Trying to connect an analog EQ/Compressor in logic.

EQ/Comp Out > RME 5/6 In
EQ/Comp In > RME 5/6 out

Logic I/O Output: 5-6 Input: 5-6
(Placed on Stereo Out on Logic Mixer)

Not picking anything up..? gruudge


Cant post images only links for some reason... I/O placed on 'Stereo Out' in Logic (but no visual signal detected on channel)
https://ibb.co/hd6jDxp
https://ibb.co/Q9s881p
https://ibb.co/LgfwVcr
https://ibb.co/BsWr4Zk
https://ibb.co/yB1GJ2H
https://ibb.co/VD0m4mf
https://ibb.co/ZWn8stG


https://ibb.co/hd6jDxp
https://ibb.co/Q9s881p
https://ibb.co/LgfwVcr
https://ibb.co/BsWr4Zk
https://ibb.co/yB1GJ2H
https://ibb.co/VD0m4mf
https://ibb.co/ZWn8stG

Dread 20th June 2020 05:41 AM

https://ibb.co/ZWn8stG

andychamp 20th June 2020 06:19 AM

In RME Total Mix you are currently routing your Software out 5/6 to your main out.
You should send it to hardware out 5/6
Click on 5/6 in the bottom row, to select it as destination (its colour will become brighter, like the master is now, and 5/6 should show up as destination below the faders in the two upper rows)
Now you can turn up 5/6 in the middle row.
TotalMix is a powerful tool, but can be a bit confusing at first contact.
I highly recommend you keep it in Submix mode, at least for now, or it‘s easy to get lost in the routing.

Dread 20th June 2020 06:44 AM

Quote:

Originally Posted by andychamp (Post 14810617)
In RME Total Mix you are currently routing your Software out 5/6 to your main out.
You should send it to hardware out 5/6
Click on 5/6 in the bottom row, to select it as destination (its colour will become brighter, like the master is now, and 5/6 should show up as destination below the faders in the two upper rows)
Now you can turn up 5/6 in the middle row.
TotalMix is a powerful tool, but can be a bit confusing at first contact.
I highly recommend you keep it in Submix mode, at least for now, or it‘s easy to get lost in the routing.

AndyChamp, a Champ you are indeed sir! Thank you, thank you, thank you!kfhkh