Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Cockos Reaper (https://www.gearslutz.com/board/cockos-reaper/)
-   -   Fader for volume automation (https://www.gearslutz.com/board/cockos-reaper/1299054-fader-volume-automation.html)

BlindInTexas 17th February 2020 08:36 AM

Fader for volume automation
 
Hi!
I'm wondering what kind of fader controller I could use for just writing automation/panning in reaper?
Will it do with for example a behringer xtouch mini or a korg nanokontrol?

Thanks in advance!

Airon 17th February 2020 02:09 PM

You can use those, yes. Precise and comfortable they are not however.

I recommend a unit that has at least one motorized touch-sensitive fader. The X-Touch Mini has one non-motorized but touch-sensitive fader, but it is a little more complicated to setup.

The following goes for all controllers capable of sending MIDI CC controller data in an absolute fashion, rather than relative.

In Reapers action list there are commands you can bind a midi or osc controll source to.

Track: Set volume for last touched track (MIDI CC/OSC only)
Track: Set volume for selected tracks (MIDI CC/OSC only)

Add a shortcut for one of these actions and move your midi knob or midi fader(remember to enable that midi device for control messages in the preferences/midi devices). Something similar "MIDI Chan 2 CC 11" will show up. The dropdown menu next to "MIDI CC:" should be set to Absolute, unless you know what you're doing. You can set the checkbox "Soft takeover (absolute mode only)" or not. That's your choice.

Test the knob on a currently selected track for example, and see whether it works. You now have a control source.


For 1-fader motorized units such as the X-Touch One, Presonus Faderport or Icon Platform Nano, just follow the setup instructions. It'll usually involve using not them not as midi devices, but as a controller via the Preferences/Control/OSC/web section.

I use a Presonus Faderport 16. The faders are fine, but it's up to you to choose what works best for you.

BlindInTexas 17th February 2020 03:27 PM

Thanks for the reply! I'll definitely look into a motorized fader unit. Since writing automation is my priority and not controlling midi this seems to be the best choice. I now have a better understanding of this stuff!

Thanks again :)

studer58 18th February 2020 03:42 AM

Don't forget that you can also automate groupings of tracks ( eg drums) via the use of folders, and then write automation for several tracks at once, if that's appropriate to your mix method and style ?

If you check the videos section of the Reaper main page, you'll find many helpful guide videos for setup and usage of automation control surfaces, from people like Kenny Gioia (Reaper Mania) and The Reaper Blog. Also check out videos and guide articles in the Reaper section of Sound On Sound magazine

funkycam 27th February 2020 09:04 AM

1 slider faderport is fantastic with reaper