Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Geekslutz Forum (https://www.gearslutz.com/board/geekslutz-forum/)
-   -   Sub-D 25 pin routing box? (https://www.gearslutz.com/board/geekslutz-forum/1293862-sub-d-25-pin-routing-box.html)

dlmorley 8th January 2020 08:39 PM

Sub-D 25 pin routing box?
 
1 Attachment(s)
Hi all
I have 16 outs on Sub-D 25 pin on my Antelope Audio Interface
I'd like to route them to 2 destinations (a summing box and my console both on same sub-d connections)
I have read that using the routing boxes works but I ordered some on amazon and they don't (only right channels)
Is there a switcher that is wired 1 to 1 that is available online?
Something like this
Cheers!

MYGFH 9th January 2020 07:13 AM

Found it!

https://youtu.be/TSwqnR327fk

crosscutred 9th January 2020 09:46 AM

This is another option

http://www.l-com.com/d-sub-db25-y-sp...5m-db25f-db25f

https://www.ebay.co.uk/itm/L-COM-DB2...oAAOSwb9hdcrz~

I use the switch boxes to switch between tape machine and converter outputs, they work well. Just coming from one set of outputs you only need to split the signal, switching adds another potential dirty contact.

deedeeyeah 9th January 2020 09:59 AM

i'm using a mostly half-normalled patchbay with d-sub25's in the back (and tt's on the front) so i can split (but not switch) almost any signal.