Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Harrison Mixbus (https://www.gearslutz.com/board/harrison-mixbus/)
-   -   How to you assign a channel to Mixbus 1 or two? (https://www.gearslutz.com/board/harrison-mixbus/1187149-how-you-assign-channel-mixbus-1-two.html)

Jason rocks 11th November 2017 09:15 PM

How to you assign a channel to Mixbus 1 or two?
 
With version 3, the output of each channel showed the MixBus channel options. On version 4 it only shows my ADAT outs. There is no MixBus option after the VCA on the top of the channel

JSchlomo 13th November 2017 03:37 PM

Quote:

Originally Posted by Jason rocks (Post 12953428)
With version 3, the output of each channel showed the MixBus channel options. On version 4 it only shows my ADAT outs. There is no MixBus option after the VCA on the top of the channel

Either I didn't get it correctly or you phrased it shlightly odd, but otherwsie you just click one (or more) of the 8 or 12 buttons (depending on you using normal Mixbus or 32c) on the channel for routing to the corresponding mixbus.