Gearslutz

Gearslutz (https://www.gearslutz.com/board/)
-   Q+A with Robert Babicz (https://www.gearslutz.com/board/q-a-with-robert-babicz/)
-   -   Master Compression (https://www.gearslutz.com/board/q-a-with-robert-babicz/1064558-master-compression.html)

nms 29th January 2016 03:51 PM

Master Compression
 
Hello Rob! I see the mods made a great choice for an electronic music Q+A :)

I was curious on how you usually like to setup your master compression when it's for your own tracks.

1. Do you usually use the HPF on the compressor's detection circuit? If so, do you use it around 50hz just to filter the low subs from the detection circuit or set it higher like 80-120hz?

2. I know you prefer only a small amount of gain reduction on the master compressor. Do you usually avoid using ratios higher than 2:1 here?

RobAcid 30th January 2016 11:07 AM

hi,
i never go over 2.1 and HPF is allways in, around 100-150 hz