Slight hollow sound to Tascam DR-40
Old 16th March 2013
Gear interested

Thread Starter
Slight hollow sound to Tascam DR-40

Have mixed some audio obtained via Tascam DR-40 and some by an old camera. The news host's voice is from the Tascam. The guest speaker is from the old camera. Any way to remove the background hiss / hum from the guest speaker? I have tried de-noising it, high pass, de-essing it, several other things. Nothing really works. Was going to re-record the voice, but I didn't know if I could recapture the character.

Regarding the Tascam, it sounds just a bit hollow. Not bad, I guess. Just a bit. Would sound quilts / cushioned moving blankets hung on the walls fix this?

Basement Karate Video

Any thoughts would be greatly appreciated!
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Similar Threads
Thread Starter / Forum
bjornson / Remote Possibilities in Acoustic Music & Location Recording
sideshowluke / So much gear, so little time!
charlienyc / Geekslutz forum

Forum Jump
Register FAQ Search Today's Posts Mark Forums Read Search