The No.1 Website for Pro Audio
 All  This Thread  Reviews  Gear Database  Gear for sale     Latest  Trending
Goodhertz CanOpener Studio v3
Old 24th June 2019
  #241
Gear Maniac
 
ilalin's Avatar
I find that in order to control and hear the low end I have to up the bass in CO3 after SW4 considerably (+4). This is because I mix and master on headphones and work with EDM. I don't have access to monitors and a sub, especially in a treated room so this is my solution for now. It does work but is not preferable.
Old 24th June 2019
  #242
Lives for gear
 

hmmm ... got my first Trial End warning in the next few days ...

wonder what the release schedule is going to be ...
Old 24th June 2019
  #243
Gear Addict
 

Quote:
Originally Posted by ilalin View Post
I find that in order to control and hear the low end I have to up the bass in CO3 after SW4 considerably (+4). This is because I mix and master on headphones and work with EDM. I don't have access to monitors and a sub, especially in a treated room so this is my solution for now. It does work but is not preferable.
I too mix with cans and have found Bassroom an invaluable tool to deal with bass.
Old 24th June 2019
  #244
Here for the gear
 

Anyone using the dt 880 pro 250 ohm could recommend good settings? it sounds really good and cohesive with 150 crossfeed (most realistic settings with 55 or 60 angle) but the stereo image practically disappear. It would be nice if at these settings the stereo image doesn't narrow that much.
Old 25th June 2019
  #245
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by RJHollins View Post
hmmm ... got my first Trial End warning in the next few days ...

wonder what the release schedule is going to be ...
We just finished work on the new HQ Mode. It's sounding really good!

We also ended up rolling some graphics updates for all our plugins into this update, so it might take a little longer.
Old 25th June 2019
  #246
Lives for gear
 

Quote:
Originally Posted by devinkerr View Post
We just finished work on the new HQ Mode. It's sounding really good!

We also ended up rolling some graphics updates for all our plugins into this update, so it might take a little longer.
Is there a plan for beta-testers when Trial time ends ?

Of course, HQ mode has peaked additional interest
Old 25th June 2019
  #247
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by RJHollins View Post
Is there a plan for beta-testers when Trial time ends ?

Of course, HQ mode has peaked additional interest
We can do trial resets for any beta testers who don't own CanOpener.

Hope you like the HQ Mode! It has much higher resolution EQ and a new hybrid phase topology that is very cool.
Old 25th June 2019
  #248
Lives for gear
 

Looking forward to the update. CanOpener is a must for me when working with headphones.
Old 26th June 2019
  #249
Lives for gear
 
thermos's Avatar
Quote:
Originally Posted by devinkerr View Post
We can do trial resets for any beta testers who don't own CanOpener.

Hope you like the HQ Mode! It has much higher resolution EQ and a new hybrid phase topology that is very cool.
Will this change the tone when the eq is not in use as well?
Old 26th June 2019
  #250
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by thermos View Post
Will this change the tone when the eq is not in use as well?
Essentially, no. The HQ Mode will mainly affect the EQ and loudness compensation. However, there is a slight improvement in overall digital fidelity with HQ Mode "ON." Basically, if you have the CPU cycles to spare we'd recommend turning it on.
Old 26th June 2019
  #251
Lives for gear
 
thermos's Avatar
Quote:
Originally Posted by devinkerr View Post
Essentially, no. The HQ Mode will mainly affect the EQ and loudness compensation. However, there is a slight improvement in overall digital fidelity with HQ Mode "ON." Basically, if you have the CPU cycles to spare we'd recommend turning it on.
Sick. Looking forward to it!
Old 28th June 2019
  #252
Gear Maniac
 

I'm just demoing this. I'm liking it on the whole, just a little unsure about the bass boost and am currently trying to re-balance this with the EQ.
Overall though it is working really well for me.

Will the update be free to current users or is it best to wait to purchase after the update?

Thanks
Old 1st July 2019
  #253
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by woodnut View Post
I'm just demoing this. I'm liking it on the whole, just a little unsure about the bass boost and am currently trying to re-balance this with the EQ.
Overall though it is working really well for me.

Will the update be free to current users or is it best to wait to purchase after the update?

Thanks
Yes! The update will be free for all current owners. Also, if you'd like to test out the current beta, just send us an email.
Old 12th July 2019
  #254
Here for the gear
 

I would like to try using can opener 3 on streaming music on a windows pc. It
sounds like can opener will only run as vst inside a daw. I have sonar works that runs without a daw. I use an rme multiface with total mix and my daw is ableton live.
Old 13th July 2019
  #255
Lives for gear
@ audiofunken : OSX user here, but I got a licence for that to use CO outside of a DAW. Works like a charm. There might be some Windows equivalent ?
Old 14th July 2019
  #256
Gear Nut
 

Quote:
Originally Posted by audiofunken View Post
I would like to try using can opener 3 on streaming music on a windows pc. It
sounds like can opener will only run as vst inside a daw. I have sonar works that runs without a daw. I use an rme multiface with total mix and my daw is ableton live.
I use DDMF's Virtual Audio Stream software. I use the 64bit version in both Windows 10 and Win7. It's a bit picky when scanning for plugins, but after enough tries it loads them (VST2 & VST3).

They provide a DDMF driver (easy-enough to switch to in Windows). I'm currently using it with Youlean>Sonarworks>CanOpener (latest beta). It works for me though it may rarely flake out. Still, for the most part, I enjoy it for streaming, listening to CDs, etc.

BTW, for me, the new version of CanOpener is great!

Good luck!
Steve
Old 14th July 2019
  #257
Lives for gear
 

still waiting on the HQ version !
Old 14th July 2019
  #258
Gear Addict
 

Me too
Old 15th July 2019
  #259
Here for the gear
 

Quote:
Originally Posted by blamejake View Post
I use DDMF's Virtual Audio Stream software. I use the 64bit version in both Windows 10 and Win7. It's a bit picky when scanning for plugins, but after enough tries it loads them (VST2 & VST3).

They provide a DDMF driver (easy-enough to switch to in Windows). I'm currently using it with Youlean>Sonarworks>CanOpener (latest beta). It works for me though it may rarely flake out. Still, for the most part, I enjoy it for streaming, listening to CDs, etc.

BTW, for me, the new version of CanOpener is great!

Good luck!
Steve
Thanks-I'm on Windows 10 so I loaded this up this morning and it seems to work really well.
Old 15th July 2019
  #260
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by RJHollins View Post
still waiting on the HQ version !
We're hoping to send out the next beta Wednesday or Thurs this week.
Old 4 weeks ago
  #261
Lives for gear
 
blaugruen7's Avatar
i am demoing canopener right now and so far like it.

will the new version be free for old owners or should i wait for the new version to arrive?
Old 4 weeks ago
  #262
Lives for gear
 
blaugruen7's Avatar
Quote:
Originally Posted by devinkerr View Post
One reason to try using 45º is that you can create the feeling of a narrower image while using less crossfeed. So 100%/45º is often a nice pairing, while with 150%, I'd usually use 60º. Hope that helps!
thank you for the tip. i really like what i hear woth canopener.
another last question (for now

i am using the hd600 and sonarworks. do you do the bass -1 db, too?
Old 4 weeks ago
  #263
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by blaugruen7 View Post
thank you for the tip. i really like what i hear woth canopener.
another last question (for now

i am using the hd600 and sonarworks. do you do the bass -1 db, too?
No need for the -1 dB bass in the new version — it'll sound great with HD600's with just the default setting now.
Old 4 weeks ago
  #264
Gear Nut
 

Quote:
Originally Posted by blaugruen7 View Post
i am demoing canopener right now and so far like it.

will the new version be free for old owners or should i wait for the new version to arrive?
Stated above:

Quote:
Originally Posted by devinkerr View Post
Yes! The update will be free for all current owners. Also, if you'd like to test out the current beta, just send us an email.
About to purchase myself...
Old 4 weeks ago
  #265
Lives for gear
 
blaugruen7's Avatar
ah, very nice. cheers.
such a cool tool!
Old 4 weeks ago
  #266
Lives for gear
 
blaugruen7's Avatar
i found a bug i think.
at least in cubase 10 when i have iton the master and have different setting for A and B only the active setting during saving the session will be saved.
when reloading both A and B will then have have the same setting.
i am still in demo modus, still like it very much.



ps.
found out that even closing the plugin window and reopening does reset the B setting.
is this supposed to be a feature? i would prefer setting which dont reset...
Old 4 weeks ago
  #267
Hi, how can i try latest beta release? it would be nice to compare with my hd 600 thanks!
Old 4 weeks ago
  #268
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by blaugruen7 View Post
i found a bug i think.
at least in cubase 10 when i have iton the master and have different setting for A and B only the active setting during saving the session will be saved.
when reloading both A and B will then have have the same setting.
i am still in demo modus, still like it very much.



ps.
found out that even closing the plugin window and reopening does reset the B setting.
is this supposed to be a feature? i would prefer setting which dont reset...
Currently, this is the expected behavior, but I think you're right that it would be nicer if the A/B settings stuck around. I'll see what we can do.

EDIT: turns out that was a quick fix. Now A/B settings will stick around even when you close/open the UI

Last edited by devinkerr; 4 weeks ago at 03:03 AM.. Reason: update on behavior
Old 4 weeks ago
  #269
Gear Addict
 
devinkerr's Avatar
 

Quote:
Originally Posted by andres_feret View Post
Hi, how can i try latest beta release? it would be nice to compare with my hd 600 thanks!
Just send us an email and we can send over the latest beta.
Old 4 weeks ago
  #270
Gear Addict
 

Is the new version more CPU heavy ?
Topic:
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
Forum Jump