The No.1 Website for Pro Audio
 Search Reviews  Search Gear Database  Search Gear for sale  Search Gearslutz Go Advanced

Description

PEQ500 is a full Pultec EQP-1A & EQP-1R type passive EQ circuit combined but with 8 extra low frequencies and 5 extra high frequencies. The Q (bandwidth) control for the high boost bell curve can go twice as wide as a normal Pultec and it can also do one thing I have never seen on any other Pultec or clone do. Pushing on the Q control will switch the high boost to a shelf with the Q control still varying the slope going into the shelf.

  • EQ In / out toggle switch with blue LED
  • Electronic Balanced discrete opamp input to allow for large input levels.
  • High Cut shelf from 0 to -16dB switchable to 5kHz, 10kHz, 20kHz.
  • High Boost bell / shelf with variable Q / Slope from 0 to +16dB switchable 1kHz, 1k5kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz, 20kHz, 25kHz.
  • Push on Q control switches from high boost bell to shelf with orange LED lit when in shelf mode
  • Low Cut shelf from 0 to -16dB switchable 10Hz, 20Hz, 30Hz, 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 160Hz, 200Hz, 240Hz, 300Hz.
  • Low Boost shelf from 0 to +16dB switchable 10Hz, 20Hz, 30Hz, 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 160Hz, 200Hz, 240Hz, 300Hz.
  • Huge output transformer (same size as Neve LO1166).
  • Internal jumper for output ground lift.
  • Double sided Gold plated rear edge connector.
  • API 500 and GroupDIY 51X compatable edge connector.

Discussions

the lunchbox 2008!

I just got a pair of JLM PEQ500 (Pultec style) and man they are so cool sounding. nIC

View Post

Pulse Techniques EQP-1S3 vs 1A3

...500 series style Pultec that is laid out like a a 1S3 clone in the high band is the JLM PEQ-500...though there is a full sized version with even more low end controls than the originals...the JLM PEQ500 has the 10KHz shelf feature (it's just not that obvious, but if you read the specs...

View Post

Sickly Jupiter-6; thoughts?

a bit more direct .. TL Audio 16: 2 Summing Mixer (no integratet cirquit in the path.. ) with a compressor in front ( vintage dbx 160, klark dm500, vintage eventide Comp, vintage ADR Compex F760 and a lot more.. :) ) and either an orban optimod 8100 or aphex dominator / compellor...

View Post