Old 26th December 2011
  #1
Lives for gear
 
sigmatibet's Avatar
 

Thread Starter
Neve DPD

Hello, I have a question for Neve dpd (dpa) owners:
I'd like to know if line input and mic input can work independently if permanently plugged to the rack.
My aim is to use it both for tracking (mic) and for mixing down (line) whithout having to re-plug every time.
Thnxx
Old 26th December 2011
  #2
Gear addict
I have a DPD and have the xlr mic input connected to my Sony C800g and a line input from a Gtr signal .... the front has mic input from half past to o'clock clockwise and line input half past to o'clock anti clockwise on both channels ....
Hope this helps - the one been used (line or mic) disables depending on what your using (input level)
Kj
Old 26th December 2011
  #3
Lives for gear
 
sigmatibet's Avatar
 

Thread Starter
Thank you. This was very helpful.
Another question:
Can I plug the insert to a Patch bay or does it interrupt tue signal?
Old 26th December 2011
  #4
Gear addict
It interrupts the signal so you just need to normal the patchbay and it will be fine.
Old 26th December 2011
  #5
Lives for gear
 
sigmatibet's Avatar
 

Thread Starter
Thank you
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Similar Threads
Thread
Thread Starter / Forum
Replies
Dirty Halo / High end
2
Dirty Halo / High end
2

Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read Search