OK, something to spice up Geekslutz = here is where we post images of the INSIDE of audio equipment. Disclaimer; any photo...

Tim Farrant

I have been collecting schematics for 30 years and 5 years ago I started make them available at my site www.SecretMind.dk but...

MicroSonic

DSP Innovations has recently launched a FREE data sheet search site. The site, Datasheetpro.com - Search Electronic Components ,...

gabriel1

Anyone who offers technical services should get themselves listed into the new member directory here... Gearslutz Directory:...

Tim Farrant

Hello, I'm very new to using a soldering iron, but I've soldered a few hundred cable connectors so far and put together a...

trubadoor

Hello, reacently i found a wonderful sounding vintage Italian tube mixer-tape echo sistem Semprini Stereofon Eco 707...Its...

vly

I used to have a BLA PM8 and I have been using a DIYRE SB2 summing mixer which is cool, but I’m really missing having level and...

chinesewhiteman

I've got Cool Edit Pro but can't remember how to do it. The reason I ask is that I've just replaced the "surrounds"...

stixstudios

Hi, I've found a boss bx80 mixer then I have clean with air dry and kontakt cleaner, but it act weirdly with some instrument. On...

Kortes

Hello all. Some time ago, I purchased a small 8x2 mixer from a member here (who apparently knows nothing about it) in an ebay...

NEWTON IN ORBIT

Hi all, I was fortunate enough to scoop up a 200b the other night. I am currently refurbishing and inspecting it before powering...

D33K

Hello all, This is my first post on this website and i feel that i would get the best answer to my question here. I am...

KatMorr

Hi GSers - Diagnosing my original FX-G384 Grey Face with THAT 2002T VCAs and LF356N ICs. I'm hoping some here may take pity on...

SeanRyder

Hello, I'm new to the forums, I came across this forum looking for info about this topic and it looked like you might be able to...

molton

Gentlemen, ladies... My 1/2" Otari MTR 12-II 4TK works great EXCEPT when rewinding, the supply reel doesn't seem to...

juniorexploder

Hi all, I have an Ampeg J12-t (the 90s reissue) that won't power on, and I'm trying to figure out why. In testing the power...

Riinehart

Attached are some photos of things I thought may be requested. Okay, So I have had this Mac Pro for approx 4 yrs, and it has...

Roy T

Hi, I'd like to add a master volume to my 64 Deluxe Reverb. I found this site a few months ago: AB763 Mods by Robinette,...

BrassElephant

I recently picked up a used AKG C414-B XLII for cheap with the disclaimer from the dude I bought it from that "it only works...

CarneyAudio

Seeking a bit of guidance on my UK mains installation. little rooms \ project studio __________________ / | c | ...

forestcreature

Hi I recently picked up an old Studiomaster Mixdown Classic 8 desk to sum my synths but it didn't come with a manual and I can't...

Jazz Hands

New documentary about how Swedish Producers and Song Writers had hits with the likes Brittney Spears. Did somebody watch it ?

mojasi

I would like to know what ideas people have come up with to lower latency/lag while doing live track recording. I have had a few...

s wave

I have a Kurzweil K2600 XS 88 key workstation with an internal hard drive that won't mount. I'm wondering if anyone out there has...

Ren Man

I've got a Roland rack sampler (S-750) that needs one and didn't get any replies in the Electronic Instruments forum. I've also...

Jidis

Hi, I have an equi-tech power conditioner that i used in my NYC studio to power the whole audio system. It takes 220V as an input...

Sadomiso

Anybody know if there is supposed to be signal loss when going from balanced to unbalanced? The ultimate goal is to connect a...

beachnoise

I need to Wire an External XLR On/Off Switch Pedal. I'm currently figuring to solder ground and nuetral terminals direct from...

tomana

Hey guys. Ive recently bought a Soundcraft 600 mixing console and have been cleaning it up. I've come across an issue I just...

GeorgePuddin

In the arena where I work, I have to replace a pair of female RCA panel jacks that are loose/worn out. This is an aux input to...

SurfGreenTele

Hi :) I'm trying to fix 7 keys on a Roland sk-500. Some mute, some sounds too loud, etc.. I've never done this before so I...

hhhheedddaaaa

Hi. Awhile back i built a p.s. for my soundcraft delta board ( off suggestions from many threads with many knowledgable...

sameal

Does anyone have any info on this please? It's a Neve monitor panel. I believe it was pulled from an 8026 console judging from...

woodfoot

I discovered a somewhat weird phenomena when trying different ways to interface a transformer balanced output gear device...

Rob Coates

Looking for an experienced analog electronics person in the San Francisco Bay Area with experience on Ecoplate I plate reverb...

jbrave

Hello guys(and gals), I've been searching for a couple of days for Genelec 1029A schematics or even better a service manual....

Schizomorph

I'm looking at replacing the transistors in the master channel of my console in the hopes of a small sound quality improvement...

spice house

I recently damaged the output stage of my Loft 450 accidentally and need to fix it. If anybody has a schematic for this unit I...

ELI-173

Hi, I have been having issues with the gain knobs on my RFT MV/810's for years now. A little scratchy, a bit intermittent. But...

innerbooty

Hi everyone, I haven't posted anything for a while so I have just recently decided to extract the digit and fully restore my...

strahany

lately i bought two urei gear, one 1176 and the other is eq 546, and i plan to recap but i found out that they use with the same...

phatmorph

Hi I need an electric diagram of PSU ASP 500/A Please share. Thanks in advance

Alex Casey

Greetings, i am having a problem with a bass guitar mod and i need help. so i changed the wiring in a jazzbass to to use each...

Xamobillis

I'm actually having trouble removing this klein-tuchel connector for recabeling. Anyone got any ideas how to save this little...

kerwin

Hi, I am having some trouble with one of the channels on my 1st gen Xone 62. If anyone could help I'd greatly appreciate it. The...

Szyrs

Anyone know if an infrared heater (1000watt) can be damaging to mics and audio equipment or interfere with sound? Thanks in...

Simon Xang

My Korg Arp Odyssey just stopped working after I moved. It's not outputting sound now. I am thinking about repairing it myself...

nrkemp

I would like to start a thread for all of you slutz out there that has any info or schematics on AMEKS BIG, Recall, and 501 by...

stevo991

Hello, I'd like to replace the Japanese internal transformer of my Korg MS-10 with a 240v one. Judging from the schematics (see...

mogazi!

Like the title says, I'm getting no output from the single channels. The L/R channels have sound, but is pretty quiet and puts...

MachineGunFunk

Hi, I am finally able to startup a Soundcraft DC2000 buy at a good price a few years ago. But after the happiness of seeing...

SgtHammer

Hi! I am wondering what DAC is used in MixPre-3 and its headphone amp and whether it is considered to be "better" /...

swedishstudio

Hello, I have a console from the early 90's, an Allen and Heath GS3 (+4dbu operating level), bought it a year and half ago (my...

Logima

Hey guys Im a about to start on my 400B 10 channel frontend project and wanted to know if anyone knows any good mods they can...

The Convicted