The No.1 Website for Pro Audio
dbx 900 series pinout
Old 14th August 2006
  #1
Gear Maniac
 
John Noll's Avatar
 

dbx 900 series pinout

I'm going to rack up a 902 de-esser module and have had no luck finding the pin out info for the 900 series modules. Anyone have this info? Also, what are the power requirements? Thanks.
Old 15th August 2006
  #2
Lives for gear
 

This is a generic diagram for single channel 900 series cards. I'm quite sure the audio and 15 volt connections are correct for a 902, but that module might not actually require +/- 24volts. You can check by inspecting the module to see whether pins 1 and 2 actually go anywhere on the PC board.
Attached Thumbnails
dbx 900 series pinout-dbx02.jpg  
Old 15th August 2006
  #3
Gear Maniac
 
John Noll's Avatar
 

Thanks David,
There are traces to components from both the 15 and 24 volt pins. As a quick test, I put 24 volts on the module and the LEDs would not light. When 15 volts was connected, the LEDs functioned.
Old 15th August 2006
  #4
Gear Maniac
 
John Noll's Avatar
 

Here's a link with the 902 schematics.


http://members.tripod.com/~coreyeng/dbx1.htm
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
Forum Jump