The No.1 Website for Pro Audio
Insert Cable Trouble
Old 11th May 2006
  #1
Gear Addict
 
🎧 15 years
Insert Cable Trouble

I'll try this querry over here for a change.

I made some insert cables the other day to use between a Soundcraft Ghost and a Manley Varimu.

Initially I made them without pin 3 tied in. So I made some inquiries around and Manley responded with this on page 20: http://www.manleylabs.com/PDF/HIFI_M...manual2006.pdf

So I wired them that way. But now I am getting a hum but only under these circumstances:

1. I plug the the insert cables in the right half of the Ghosts main patch
plugs in the back. In other words the (mix insert, aux 5 to 8, the 2 trk A
and B inputs etc. In other words the first 4 rows of jacks in the main area
on the back are "no hum and the next 4 rows are hum). There's no hum when I
have them plugged in to the group inserts and the first four aux returns.

2. Only when the AFL buttons down on the group fader area or a solo button
down on an individual ch.

3. Even when the cables are not plugged in to the Manley gear.

Any thoughts?

Thanks,

Woods
📝 Reply
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump