The No.1 Website for Pro Audio
Question about ceramic cap values
Old 18th November 2009
  #1
Question about ceramic cap values

Also, I don't know how to read value of the caps, from the schematics of a dbx 163X:

10SE1
1M50E1
470M35E
.1MD3
Old 18th November 2009
  #2
Lives for gear
 

They are probably marked with some variant of an OEM part number, but the value and voltage can be verified from the schematic by where it is used.

10SE1 = 10uF electrolytic or tantalum, 25V or more.
1M50E1 = 1uF, 50V electrolytic or tantalum.
470M35E = 470uF, 35V, electrolytic.
.1MD3 = 0.1uF, 50V or more, ceramic

The 10NPSE1 would be 10uF non-polar, probably 25V or more. To know if it's tantalum or not, look at the PC board.
📝 Reply
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
🖨️ Show Printable Version
✉️ Email this Page
🔍 Search thread
♾️ Similar Threads
🎙️ View mentioned gear
Forum Jump
Forum Jump