The No.1 Website for Pro Audio
M VariMu slight channel difference
Old 16th November 2009
  #1
Gear Maniac
 

M VariMu slight channel difference

This is more out for curiosity sake, but I was measuring the Manley VariMu I'm using and I'm seeing a peak at 60Hz (and it differs in level between the channels.) The peak on the left channel is +10db higher than the one on the right channel and far stabler(which has a subtle peak and then drops to some broadband noise 10db below that signal.) Could there be an issue cropping up or a way to get rid of it? I've checked my signal chain and it's definitely being generated by the gear and not converters/cables/patchbay. I haven't gone through and started swapping tubes but might if I have some time just to figure out what's creating it. (BTW, I do realize that 60Hz must mean it's a mains hum in the US, I'm more curious about the difference between channels)

The reason why this is really just curiosity is because the level of this peak is -100 dbFS (Left) verses -110 dbFS (Right) so it's not affecting any work.
Old 17th November 2009
  #2
Lives for gear
 

The channel might also be closer to the power transformer, there could be a (slight) difference in grounding or a local filtering cap could be a little off.

You'd have to look inside and experiment. The questions is, of course, if it's worth it, but I know how these deviations can be annoying. ;-)
📝 Reply
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
🖨️ Show Printable Version
✉️ Email this Page
🔍 Search thread
♾️ Similar Threads
🎙️ View mentioned gear
Forum Jump
Forum Jump