Kenton 2000pro mkII question :D
Old 23rd June 2013
  #1
Gear interested
 

Thread Starter
Kenton 2000pro mkII question :D

Hi,
For some reason my Kenton PRO MKII is triggering key in reverse.

Kenton ch B out. when I hit a key it does not play but when I let go of the key it plays the note.

my set up goes as:
ext MIDI keyboard connected to Kenton pro mkII (MIDI in).
out from Kenton pro channel A to s-trigger MIDIch1 in to minimoog (works fine)
out from Kenton pro channel B to s-trigger MIDIch2 in to PRO 5 (triggering key in reverse)

when I switch the synths to different channels A/B on the Kenton it seems that ch2 on the Kenton is having the issue.

it only has this problem with s-trigger out on ch2 on the Kenton pro MKII.

thanks for all the help im sure its something stupid in the settings of the Kenton
im just lost at this point

:D
Old 23rd June 2013
  #2
Lives for gear
 
bil_g's Avatar
 

Are you sure this "PRO 5"(?) needs s-trig instead of a normal gate signal? If it's not a Moog, odds are it's not s-trig.
Old 23rd June 2013
  #3
Gear interested
 

Thread Starter
Quote:
Originally Posted by bil_g View Post
Are you sure this "PRO 5"(?) needs s-trig instead of a normal gate signal? If it's not a Moog, odds are it's not s-trig.
Sorry I messed that one all up. I was trying to say sequential circuits pro one cv/gate in.

Thanks
Old 23rd June 2013
  #4
Lives for gear
 
bil_g's Avatar
 

Oh, it's definitely not s-trig. Set it to V/gate.
Old 23rd June 2013
  #5
Gear interested
 

Thread Starter
Quote:
Originally Posted by bil_g View Post
Oh, it's definitely not s-trig. Set it to V/gate.
thanks that was the problem

just had to change ch B on the Kenton pro to s-trigger and the minimoog is working just fine now.

thanks
Old 23rd June 2013
  #6
Lives for gear
 
bil_g's Avatar
 

Topic:
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read Search