I recently got a new a setup and was hoping for suggestions.
I'm open to new ideas, perhaps there was an order I was ruling out or over thinking. On Sunday I'm auditioning to be in a Dream Pop band (if that helps)
I play a Gibson EB-0 through a Fender Rumble 350.
My Mackie mixer is plugged into my RCA jacks which I run my two Roland SP-404s, Elektron Machinedrum and Nord Lead through which has a Line 6 M9 in the FX loop.
In main input I have an AB/Y switch where I've connected my bass and Dave Smith Mopho.
Here are the pedals I have that I'm putting on my PedalTrain into the Y jack to effect both my bass and Synth (Mopho):
Edit: Perhaps I misphrased this.
What I meant was putting the ones I listed in order, sorry for the misunderstanding.
Behringer SM200 Slow Motion (auto swell)
Boss RC-20XL (looper)
Boss SL-20 (slicer)
Digitech Hardwire Supernatural Ambient Verb
Earthquaker Devices Organizer (Church organ)
Fender Tuner
Moog Lowpass Filter
Moog Ring Modulator
ProCo Turbo Rat
Strymon Timeline (delay)
Fender Tuner
Earthquaker Devices Organizer (Church organ)
Behringer SM200 Slow Motion (auto swell)
Moog Ring Modulator
Moog Lowpass Filter
ProCo Turbo Rat
Boss SL-20 (slicer)
Boss RC-20XL (looper)
Strymon Timeline (delay)
Digitech Hardwire Supernatural Ambient Verb
So this is starting off with the tuner into the bass/synth ending with the reverb into the amp correct?
I like this and would never thought of that, thanks.
The tuner should be first so that it receives a clean signal from your instrument. The reverb is last so that it affects the whole signal including all the effects.