The No.1 Website for Pro Audio
TD-3 behringer 303 clone
Old 27th March 2020
  #5911
Lives for gear
 
base615's Avatar
Quote:
Originally Posted by Rogue Ai View Post
Weird I'm using hardware MIDI sync and the start/stop button does nothing as it's in slave mode. When I press start on my MMT-8 it starts the TD-3.
Yeah, it starts for me too. It just doesn't reset so, if I last stopped it on step 12, it'll start on step 13 when I next start the DAW. I just have to turn Start/Stop off and back on and it resets to step 1 but doesn't start until I start the DAW (or my Eurorack that's actually syncing it).
Old 27th March 2020
  #5912
Lives for gear
 
base615's Avatar
Alright, plugged mine in with the USB again and tried recording. Everything synced up perfectly as long as I had it in USB sync mode. DAW sends a reset too so it starts bang on every time but, if you have a count-in, it'll start at the start of the count-in rather than the start of where you want to record. Just set the count in to the same length as your pattern or track and you'll be fine. To get it into USB sync mode press Function, then press Back and Write/Next together and press the E key which is labelled USB.
Old 27th March 2020
  #5913
Gear Guru
 
Jamie munro's Avatar
Quote:
Originally Posted by codetheory View Post
Now it isnt making any sound atall although there is level on the meter.
It's very clear you need to read the manual for logic and take two minutes to learn and understand simple things like midi and audio routing, there must be specific sections you can just jump to with a search
Old 27th March 2020
  #5914
Lives for gear
 

Quote:
Originally Posted by base615 View Post
Yeah, it starts for me too. It just doesn't reset so, if I last stopped it on step 12, it'll start on step 13 when I next start the DAW. I just have to turn Start/Stop off and back on and it resets to step 1 but doesn't start until I start the DAW (or my Eurorack that's actually syncing it).
missing a NOT + trig to reset on Stop somewhere.
Old 27th March 2020
  #5915
Lives for gear
 
Mushy Mushy's Avatar
 

Quote:
Originally Posted by codetheory View Post
Also whether you use a DAW or not isnt a factor in making good tunes, Prodigy uses a w30, which is pretty **** really.
A W30 isn't a DAW.
Old 27th March 2020
  #5916
Gear Head
 

When I record it sounds ok and is in time but when I play it back it is out of sync.
Old 27th March 2020
  #5917
Lives for gear
 
base615's Avatar
Quote:
Originally Posted by codetheory View Post
When I record it sounds ok and is in time but when I play it back it is out of sync.
Are you turning off input monitoring on the track when playing back?
Old 27th March 2020
  #5918
Gear Head
 

Quote:
Originally Posted by whatever17 View Post
you still on mumsnet?
I did ask for help on mumsnet but they just mocked me for not having an original tb 303.
Old 27th March 2020
  #5919
Lives for gear
 
Mushy Mushy's Avatar
 

Quote:
Originally Posted by codetheory View Post
I did ask for help on mumsnet but they just mocked me for not having an original tb 3030.
Nobody has one of those.



Actually they do but ssssh on the Oakley thing.
Old 27th March 2020
  #5920
Lives for gear
 
base615's Avatar
Quote:
Originally Posted by whatever17 View Post
missing a NOT + trig to reset on Stop somewhere.
Dunno how to do that from my euro sequencer. I'm only sending it a trigger. It'd be nice to have a dedicated reset input on the TD-3 but it's no major issue to just his the Start/Stop button twice before pressing play.
Old 27th March 2020
  #5921
Gear Head
 

Quote:
Originally Posted by base615 View Post
Are you turning off input monitoring on the track when playing back?
i did that still out of sync, could it be a latency issue like I had with my USB mic?

Although with that, the input was delayed while recording.
Old 27th March 2020
  #5922
Gear Head
 

Anyone know of an easy way to screen capture and audio capture a logic session?
Old 27th March 2020
  #5923
Lives for gear
 

Quote:
Originally Posted by base615 View Post
Dunno how to do that from my euro sequencer. I'm only sending it a trigger. It'd be nice to have a dedicated reset input on the TD-3 but it's no major issue to just his the Start/Stop button twice before pressing play.

only for the principle:
if you have a run/stop mechanism to control a sequencer, run is on/high, stop is off/low. connect this switch to an inverter or a NOT gate to have a on/high state when it stops, that generates a pulse to the reset.
Old 27th March 2020
  #5924
Gear Head
 

Quote:
Originally Posted by Mushy Mushy View Post
A W30 isn't a DAW.
I never said it was.
Old 27th March 2020
  #5925
Gear Head
 

So, when I play the TD3 it is in time and when I record it it is in time but when I stop recording and play back the recording it is out of time.

I have gone into audio preferences and increased buffer size etc.

I just recorded something with my usb mic and I have the same issue.

It actually sounds like the recording isnt lagging but the opposite of lagging, coming in too soon.

Which is good I guess as it means it isnt a td3 problem.
Old 27th March 2020
  #5926
Gear Head
 

Well done.
Old 27th March 2020
  #5927
Lives for gear
 
Mushy Mushy's Avatar
 

Quote:
Originally Posted by codetheory View Post
Well done.
My point, before you got your panties in a bunch over it, is that perhaps you should start your own thread. Perhaps people aren't interested in every single issue you have with yours.

Every single time I log in to read a comment about it all I see is you whinging because you don't know how to read a manual.
Old 27th March 2020
  #5928
Lives for gear
 
Mushy Mushy's Avatar
 

Again my point was you don't know what you are doing. This is fine, we've all been there. But start a new thread man.
I'm not interested in your newb issues, I'm here to learn about the TD3.
Old 27th March 2020
  #5929
Gear Head
 

Quote:
Originally Posted by Mushy Mushy View Post
You can slag us off personally as much as you want but the music is a faux pas man. We just don't do that.

I have absolutely zero problem with you hating the music, and good luck to you doing so. However slagging it off on the forum just isn't cricket.
Its a little too late for you to start claiming the moral high ground dude and your music is really bad, I would rather be hit repeatedly over the head with a hammer than listen to it again.
Old 27th March 2020
  #5930
Lives for gear
 
Mushy Mushy's Avatar
 

Quote:
Originally Posted by codetheory View Post
Its a little too late for you to start claiming the moral high ground dude and your music is really bad, I would rather be hit repeatedly over the head with a hammer than listen to it again.
Thanks for the feedback. That's the effect I was going for
Old 27th March 2020
  #5931
Gear Head
 

You know, I asked about help with the TD3 as it is a relatively new product there is limited information online pertaining to the issues I had, the manual for the TD3 is useless, I asked for help, the guy helped me solve the problem which I wouldnt have been able to do other wise, I dont know where else I could have solved the problem, its a good positive thing but you <deleted by moderator-language> had to turn into a negative, now you question my moral integrity, <deleted by moderator-language>

Last edited by Reptil; 28th March 2020 at 12:43 PM.. Reason: -
Old 27th March 2020
  #5932
Gear Addict
 
SoundReverend's Avatar
Quote:
Originally Posted by codetheory View Post
You know, I asked about help with the TD3 as it is a relatively new product there is limited information online pertaining to the issues I had, the manual for the TD3 is useless, I asked for help, the guy helped me solve the problem which I wouldnt have been able to do other wise, I dont know where else I could have solved the problem, its a good positive thing but you <deleted by moderator-language> had to turn into a negative, now you question my moral integrity, <deleted by moderator-language>
I guess it is just the tone, not you but also others. The idea to open a new thread to discuss this special issue really does make sense, so please try it.

Last edited by Reptil; 28th March 2020 at 12:50 PM.. Reason: -
Old 27th March 2020
  #5933
Lives for gear
 
Mushy Mushy's Avatar
 

Quote:
Originally Posted by codetheory View Post
You know, I asked about help with the TD3 as it is a relatively new product there is limited information online pertaining to the issues I had, the manual for the TD3 is useless, I asked for help, the guy helped me solve the problem which I wouldnt have been able to do other wise, I dont know where else I could have solved the problem, its a good positive thing but you <deleted by moderator-language> had to turn into a negative, now you question my moral integrity, <deleted by moderator-language>
I say again, and I will say it until the cows come home, ask away. Most of us (despite your recent comments) hope you succeed. Just perhaps consider opening a new thread so that those who aren’t interested can ignore it.

If it was a question here or there it’s fine but after page after page it becomes a little tiresome.


In before I’m told to f*ck myself again, which BTW, was wonderful.

Last edited by Reptil; 28th March 2020 at 12:50 PM.. Reason: -
Old 27th March 2020
  #5934
Gear Head
 

Quote:
Originally Posted by SoundReverend View Post
I guess it is just the tone, not you but also others. The idea to open a new thread to discuss this special issue really does make sense, so please try it.
This all started with mushy making a snide comment, if he hadnt done then this wouldnt be happening. I dont need advice from you mate.
Old 27th March 2020
  #5935
Gear Head
 

Quote:
Originally Posted by Mushy Mushy View Post
I say again, and I will say it until the cows come home, ask away. Most of us (despite your recent comments) hope you succeed. Just perhaps consider opening a new thread so that those who aren’t interested can ignore it.

If it was a question here or there it’s fine but after page after page it becomes a little tiresome.


In before I’m told to f*ck myself again, which BTW, was wonderful.
Again what the **** are you talking about? I have been talking about the TD3 in the TD3 thread.
Old 27th March 2020
  #5936
Lives for gear
 
Rogue Ai's Avatar
It indeed does sound like a DAW problem and not the the TD-3's fault. My TB-3 would not sync at all with Reason. The only DAW I ever used that had decent sync with hardware was Cubase and that makes sense as it started out as MIDI only.
Old 27th March 2020
  #5937
Gear Head
 

Quote:
Originally Posted by Rogue Ai View Post
It indeed does sound like a DAW problem and not the the TD-3's fault. My TB-3 would not sync at all with Reason. The only DAW I ever used that had decent sync with hardware was Cubase and that makes sense as it started out as MIDI only.
hey your music isnt too bad, I like acid box.
Old 27th March 2020
  #5938
Gear Maniac
 
kuroichi's Avatar
 

Please share some music.
Old 27th March 2020
  #5939
Gear Head
 

Quote:
Originally Posted by kuroichi View Post
Please share some music.
Haha, I will but have none recorded I only play acoustic guitar mainly, I did have a jam with a guy Primal Scream once, he liked my music.

Once I sort out this TD3 I will post some, if I havent been banned.
Old 27th March 2020
  #5940
Gear Head
 

But here is a link to my soundcloud page which I dont really use which has a couple of my mixes on it and some other tunes.

The Daniel Avery track I like very much.

https://soundcloud.com/codetheory
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
Forum Jump