The No.1 Website for Pro Audio
 All  This Thread  Reviews  Gear Database  Synths for sale     Latest  Trending
YAMAHA SY77 patches
Old 19th August 2019
  #1
Here for the gear
 

YAMAHA SY77 patches

Hello ,
i have a sy77 and i have found some patches.
I am transferring via midi via sysex and the sysex librarian.
The patches transfer and i see them come up on the sy77 internal bank though there is no sound?
There will be a few patches that play , though majority are silent?
The card works fine and the preset sounds.
So i am asking if anyone knows why this is happening?
Thanks!
Old 19th August 2019
  #2
Using the wrong outputs? Local off? Something like that I guess
Old 19th August 2019
  #3
Lives for gear
Some sound designs use specific samples that are not part of the built in sounds. At least on the SY99. Not sure if the SY77 was made to use samples other than what was built in.

Some sounds must be loaded into Bank D.
Old 19th August 2019
  #4
Here for the gear
 

Quote:
Originally Posted by elegentdrum View Post
Some sound designs use specific samples that are not part of the built in sounds. At least on the SY99. Not sure if the SY77 was made to use samples other than what was built in.

Some sounds must be loaded into Bank D.
Right ,
So patches will only work with what sounds you have currently in your banks.
I thought patches where just made up of different sounds and then saved as new sounds.

So how do people load patches without having the sounds from the patch was made.

What is local?
where would i check this and the outputs?
Thanks so much
Old 4 weeks ago
  #5
Here for the gear
 

Could it be the internal battery??
Old 4 weeks ago
  #6
Lives for gear
 
abruzzi's Avatar
 

As suggested your problem might be that the sounds you have are for a SY99, not a SY77. On an SY99 you can install sample RAM, which you can’t do on a SY77. So if you have a bank of SY99 sounds that are dependent on samples, it’s possible the bank loads and the sounds that are referencing RAM samples will be silent.
Old 4 weeks ago
  #7
Lives for gear
it's a complex unit.

Sounds cound be routed to the second set of outputs.
The controler could be set to not play the sounds
There are many things to check. With the compex and non intuative menues, there are to many things to guess at. You have to dig in a figure it out.

Starting point. Do all of the default sounds play?
Old 3 weeks ago
  #8
Here for the gear
 

Quote:
Originally Posted by elegentdrum View Post
it's a complex unit.

Sounds cound be routed to the second set of outputs.
The controler could be set to not play the sounds
There are many things to check. With the compex and non intuative menues, there are to many things to guess at. You have to dig in a figure it out.

Starting point. Do all of the default sounds play?
Hi
Thanks so much.
Yes all the default sounds play fine and when i use a card they also play fine.
Its just when i do a syse dump and try to play the new sounds.

What else could i check?

i know the sounds are for sy77
Old 3 weeks ago
  #9
Lives for gear
I'm a new TG77 owner. Here's what I would check in Voice Edit mode:

Are the Elements enabled?
- on the TG77 you can disable them by a shortcut
- it's in green lettering: Element + numberkey 1 to shut off Element 1, etc

In the Com section (F2 key on TG77), check these:

What is ElemLvl set to?
- menu item 1

What is ElemPan set to?
- menu item 6
- are you sure you're plugged in stereo?

What is OutSel set to?
- menu item 7
- choices are off, both, grp1, grp2

What is IndOut set to?
- menu item 14
- choices are the aux outputs 1-8

Hope that helps somehow.
Old 1 week ago
  #10
Here for the gear
 

Im still having no luck , I changed the internal battery.
im using Librarian and patchers are transmitting fine.
Though still no sound from any patch only a few will play??
Its doing my head in.
Anyone had any luck with trasmitting patches to the sy77?
Old 1 week ago
  #11
Gear Head
 

I transfer my sysex patches via symanager, no problems so far.
Old 1 week ago
  #12
Here for the gear
 

Quote:
Originally Posted by Jer76 View Post
I transfer my sysex patches via symanager, no problems so far.
Thanks , Is symanager for mac as well? can only find for Pc.

Is it possible for you to send me one patch that you know works?

Thanks!!
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
Forum Jump