The No.1 Website for Pro Audio
Baloran ‘The River’ Synthesizer
Old 5 days ago | Show parent
  #4531
Lives for gear
 
Musicncars's Avatar
 

Quote:
Originally Posted by Baloran View Post
Some news about "The Machin..." (it's not the real name, surprise....)

EDM machine/virus killer?
Old 4 days ago
  #4532
Gear Addict
 

Hey guys, is anyone using their River to output s-trigs via the gate outs? I’m assuming you just choose negative polarity but it’s not quite working. It could be my cables tho, the polarity is reversed no matter what I seem to do.
Old 2 days ago | Show parent
  #4533
Lives for gear
 
cramseur's Avatar
Quote:
Originally Posted by tomheck View Post
And that's just one voice card which can play in single, dual, paraphonic and polyphonic.
Mmmm
Old 1 day ago
  #4534
Gear Maniac
 

It's going well for the EEPROMS FX. They are ready, only the envelopes and postage remain to be done.
Below is the help document for the change. Sounds simple? Accessible?

http://www.baloran.com/TheRiver/Manu..._FX_EEPROM.pdf
Old 1 day ago | Show parent
  #4535
Gear Maniac
 

Quote:
Originally Posted by neonrider View Post
Hey guys, is anyone using their River to output s-trigs via the gate outs? I’m assuming you just choose negative polarity but it’s not quite working. It could be my cables tho, the polarity is reversed no matter what I seem to do.
I'm looking at this point this weekend as well as bank / Patch change management via MIDI program change.
Old 1 day ago | Show parent
  #4536
Gear Addict
 

Quote:
Originally Posted by Baloran View Post
It's going well for the EEPROMS FX. They are ready, only the envelopes and postage remain to be done.
Below is the help document for the change. Sounds simple? Accessible?

http://www.baloran.com/TheRiver/Manu..._FX_EEPROM.pdf
Is there a minimum OS version that must be running to do this?

Otherwise looks pretty thorough.
Old 1 day ago | Show parent
  #4537
Lives for gear
 
maisonvague's Avatar
 

Quote:
Originally Posted by Baloran View Post
It's going well for the EEPROMS FX. They are ready, only the envelopes and postage remain to be done.
Below is the help document for the change. Sounds simple? Accessible?
Looks doable!

I’m curious, do you have a trick to make reattaching the wooden strip inside The River a bit easier—the strip for which we removed the 10mm screws from the backside?

When I opened up my River before, I found it difficult to re-align the holes and prevent the first screw from pushing that wooden strip away during reassembly. Eventually I managed. But I figured since you must have done this often you might have a suggestion. Thanks.
Old 1 day ago | Show parent
  #4538
Gear Maniac
 

Quote:
Originally Posted by sean_synth View Post
Is there a minimum OS version that must be running to do this?

Otherwise looks pretty thorough.
Thanks, good question , version 2.10 (2.12 is better ...) for have the good effects name on LCD display
Old 1 day ago | Show parent
  #4539
Gear Maniac
 

Quote:
Originally Posted by maisonvague View Post
Looks doable!
When I opened up my River before, I found it difficult to re-align the holes and prevent the first screw from pushing that wooden strip away during reassembly. Eventually I managed. But I figured since you must have done this often you might have a suggestion. Thanks.
Theoretically, if you only unscrew the "top line", the positioning is automatic, natural, that's what happens on all the instruments that I open. It is surprising what you say. In the assembly procedure, these holes are only created when the cover is closed permanently ...
Old 23 hours ago | Show parent
  #4540
Lives for gear
 
Musicncars's Avatar
 

Quote:
Originally Posted by Baloran View Post
It's going well for the EEPROMS FX. They are ready, only the envelopes and postage remain to be done.
Below is the help document for the change. Sounds simple? Accessible?

http://www.baloran.com/TheRiver/Manu..._FX_EEPROM.pdf
Pm sent.
Old 22 hours ago | Show parent
  #4541
Lives for gear
 
drockfresh's Avatar
Quote:
Originally Posted by Baloran View Post
It's going well for the EEPROMS FX. They are ready, only the envelopes and postage remain to be done.
Below is the help document for the change. Sounds simple? Accessible?

http://www.baloran.com/TheRiver/Manu..._FX_EEPROM.pdf
Are the new EPROM being mailed to every river owner ?
Old 22 hours ago | Show parent
  #4542
Lives for gear
 
pounce's Avatar
 

Quote:
Originally Posted by drockfresh View Post
Are the new EPROM being mailed to every river owner ?
I had expressed interest in getting the new EPROMs so hopefully something will come my way.
Old 11 hours ago | Show parent
  #4543
Gear Maniac
 

Quote:
Originally Posted by drockfresh View Post
Are the new EPROM being mailed to every river owner ?
No, only to who wants it and who has read the pdf which explains the necessary manipulations
Old 11 hours ago | Show parent
  #4544
Gear Maniac
 

Quote:
Originally Posted by neonrider View Post
Hey guys, is anyone using their River to output s-trigs via the gate outs? I’m assuming you just choose negative polarity but it’s not quite working. It could be my cables tho, the polarity is reversed no matter what I seem to do.
Oops, sorry, there is a nice bug in the app. It doesn't work anymore since we can adjust everything from The Riverkey: Hz / V (Korg) and negative trigger are not functional.
I have already corrected the whole thing, but I have to do some tests before uploading the new version (2.13). It will be done during the week.
📝 Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 86 views: 9567
Avatar for chessparov2.0
chessparov2.0 2 weeks ago
replies: 3879 views: 168822
Avatar for Mr Knoch
Mr Knoch 1 hour ago
replies: 9575 views: 506042
Avatar for d33psp33d
d33psp33d 3 days ago
replies: 57 views: 3105
Avatar for Quantum7
Quantum7 3rd May 2019
Topic:
Post Reply

Welcome to the Gearslutz Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…
🖨️ Show Printable Version
✉️ Email this Page
🔍 Search thread
🎙️ View mentioned gear
Forum Jump
Forum Jump