Hi! There seems to be alot of talk about bass trapping on the board right now so I thought it was a good idea to post some...

My dad and I are fed up with peaks and null in the mix and tracking room in our studio. We've decided to build 24 - 2'X4'...

Today i started a project to build some quadratic residue diffusers. Overall not a difficult project--even though i used only...

Here's the deal. Im building 4 tri corner "modular" super chunks. Each corner will be made up of four...

I built over 30 panels of 6" Safe'n'Sound, covered all the walls, put large superchunks in corners, built two pairs of...

So I was reading other topics about closed back panels basically nullifying the benefits of an air gap. I also read that thin...

Hi everyone, I am building my first bass trap with Isover Sonepanel which is around 8000 Pa.s/m2. Am I right to understand...

Hey guys, So ive recently made the purchase of a portable vocal booth and ive been covering all edges with regards to the...

Hey guys, I'm on this site reading a lot, although I never post so I didn't need an account. I have some GIK 244's and...

Is keeping the work top of the desk as small as possible a good way to avoid/reduce desk reflections? I could go pretty small as...

Hello all, I am planning on building some panel bass traps using Rockwool in the near future, but am concerned about loose...

Hey Guys, So I'm trying to wrap my head around this subject but seem to miss something. When choosing an absorber material...

I have a space available of roughly 6'x5'x4'. I say roughly because the 4' walls are tapered. Would it be possible to stuff...

Hi gearslutz, I was browsing around and I stumbled upon a picture of a Binary Amplitude diffuser, does anyone know how to make...

Hey all, I'm gonna feel really stupid if this already exists, but here goes anyway. Can someone make a sticky thread...

I'll be going with double layer Safe'n'Sound (7") all around. Corners - full height, the rest 48". Not sure what to...

Hey everyone! Finally joining this forum after years of reading it from search results. This seemed like the best place on the...

Hi, first time posting here! I have currently been working on a new space to use for production/ vocal recording. I have...

I have a pretty simple question I think. So I want to treat a back wall in my small room with bass trap, in order to treat...

Is it possible to get dispersion in the time domain if these (flat) panels are mounted at different distances from the...

Hello guys. That´s my first post, after my introdution post. rockout I really appreciate any help! I´m planning to make a...

My small room is 5.8 x 3.7 x 2.5 m. I use it for Everything: Recording, mastering and listening. My problem is 100 - 200 hz...

I am giving some info for those willing to use Caruso IsoBond (CIB) panels in their projects (they are the best polyester-based...

I've done some DIY treatment in my room, but after reading this months "Room For Improvement" article in SOS thought...

Ok called SPI and they don't carry roxul and the mineral wool they do have is back ordered for 4 months. They do have 703 in...

I recently purchased 10 2' x 6' x 3' broadband absorbers built with Safe n' Sound (specs here). I have currently been propping...

I’m trying to tame a 30Hz null in my room, and apply a house curve. I know FIR filters by their nature cause significant...

Hi everyone, hoping for some advice on a relatively simple issue. I’m setting up treatment in a small-ish home studio room,...

Hello, I’m in the process of treating my studio room and am seeking some advice. I’m hoping that this thread will document...

Hi all, Noob question here, but the tri-corner of my "front" wall which requires treatment has an inconvenient fuse...

Does anyone know of acoustical treatments (panels, etc.) that are effective, but look more like classy decorations that belong in...

I have a dedicated media room with 5.1.4 setup and recently ventured into adding some sound treatment. The room is about 12.5'W x...

Ahoy all! I'm aiming to make some large bass traps for my little basement project studio. My current thinking is 2...

Hey guys, kinda tricky question, I hope someone could give me an opinion on this! I am basically torn between 2 options right...

Hi there guys! For bass panels placed in corners (e.g. wall & ceiling), how the bass trapping performance is varied when...

Hi, Do super chunk bass trap corners need to be the same size? I have a few corners in my room where there are things in...

Hi, I need an advice from you experienced guys. After installing porous absorber bass traps all over the room the overall...

Hi all, I'm currently working out what material I should use for Superchunks in my home studio, modes at 50hz and 100hz are an...

Hello, Here Eddy from the Netherlands. Long time audiophile who recently discovered the effect of improving acoustic. So i...

Hey guys, in this post I’m including pictures of my new studio mixing/recording room. I’m wondering your advice on where to...

Honestly i don't really know what to think about it, but i'd really like to hear Ethan's and Glenn's opinions on this. To me it...

I bought some foam bass traps from ebay that are the same shape as the Auralex ones. But when they arrived they are much smaller!...

Over the years I have had great success fixing smallish room bass problems with limp mass absorbers. As there are so many...

So I have all this material but I'm confronted with a dilemma. Should install my gyproc panels like this: studs <--...

Hi, i searched the forum and didnt find any related thread. Im just about to build basstraps for my control room and i have an...

So I'm getting the idea that there's no reason to use the more expensive OC products if I can get my hands on some cheap rock...

Mods - can you delete this thread? I’ve reposted it in the appropriate forum REW measurements, 'Day 2 Nov 20' is without the...

Hi All, Long time lurker, first time poster. Due to COVID, most post studios in LA are closed and more of us are being asked...

Hi, Apologies for not being a pro, but I am an acoustic maniac. I am planning a home renovation and I'm worried all my glazing...

Hey, I meant to post this a while ago, but I never did. This is a pretty fast way to get R38 into a form that can be...

They don't look like any diffusor pattern I've seen; and the material is possibly not dense...

Products with density and air flow resistivity data: Terminology: Air Flow Resistivity (in Norwegian: strømningsmotstand) is...

After several threads here on the relative safety of rockwool, fiberglass, and organic fibers, I did a few days of digging...