thread: Yamaha n Series
View Single Post
Old 13th April 2010
  #3348
Gear maniac
 

black belt, you can either set up sends to the mixer inputs etc, n12 1, n12 2.......

or you can select the output of the actual track to the mixer itself so you cannot hear in daw, but can hear in hardware mode.

make your tweaks, then set up your input channels in cubase and record back into cuabse, so your recording your hardware mix back into cubase, that could be individual channels or the whole group depending on what your recording.

you can even track the reverb to its own channel.