thread: Yamaha n Series
View Single Post
Old 5th April 2010
  #3336
Lives for gear
 
DarbyOhara's Avatar
 

Quote:
Originally Posted by mcmacguy View Post
Hi Ed

I'll bet your problem isn't the headphone out on the N12 - you're probably overdriving its amp. In Cubase, hit F3 to call up its mixer. Check the Aux out level - it's probably clipping. Turn it down. Problem gone?
This happens to me on almost every song once I start adding tracks.

If the problem remains, try different headphones, or run the phone out into a channel to check it.

Mick
Hi Mick, No it is not the headphones. I use top-shelf AKG pro headphones for all my studio work. Until I got the N12, I never had an issue with monitoring or playback.

As I stated before, I can also send the levels from the headphone output to both headphones or a headphone amp and it is lousy. In fact, sheer poor quality. Tin cans would do better. I am not alone if you read the guy after your post. So I do not use the headphones output at all. They are garbage!

I send my main ST out to a headphone amp... that is where I do my tracking and headphone work. I send the AUX1 out to my studio monitors (so I can control the levels separately). That is how I mix. It works for me that way. But my main comment is that... I've had many different mixers in my life (Behringer, Roland, small yamahas, phonic, to name a few) and never had an issue with headphone outs until I got the N12. They are very poor! It's not a show stopper for me... but one would think they put all this nice technology into this mixer and interface, but FAILED miserably on the built in headphone amp. Otherwise, I just love this mixer for tracking, recording and mixing. I do mastering outide this N12. ~ Ed