RCA Direct outs... low levels to PT... who knows some good bump boxes?

G0G0MRM0J0 · 2nd May 2008, 07:39 AM

The current setup I'm using involves a DIGI 002 with PT LE, and I'm running an older analog console w/ direct outs 1-16 running to my interface, adat converting for 9-16.

The console is a Panasonic Ramsa WR-T820B, and it has RCA direct outs. I'm not getting unpleasant results tracking with this console, although I am not receiving adequate levels to Tools.

This sort of thing really bothers me, as often times my meterage inside of Tools isn't very shy of half way, with faders at unity feeding my D.O.'s. I was pondering the idea of finding 20 channels (yes, odd number, but the # of channels this ramsa console has) of -10 to +4 conversion... but such a thing to my knowledge would only be a custom job.

I like the sound of my console and it serves its purpose well, but I think a problem of this nature forces me to consider scraping this model completely and finding an alternative console. I mean... I could get better levels using a mackie 24/8.... but that's really not any fun.

Any suggestions???? I mean... a bump box is one thing... but 20 channels?

The group outs and sends are all RCA as well.

Thanks,

Jules

drpat · 20th June 2008, 02:22 PM

Hi Jules,

That console has a switch on the buss cards to convert it from -10 to +4 level. You'll need to lift the master section to get to them...

G0G0MRM0J0 · 23rd June 2008, 09:29 PM

Man.... Looks like I'll have to perform surgery on her. This is exciting though. I didn't think there would be a switch, since I've never seen a manual or the inside of her.

Wow. If this works out I'll let you know. Thanks!

-Jules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Direct Boxes	noonansky	instruments, guitar, bass, amps	19	31st March 2008 10:52 PM
FMR RNC -- Do U Use Bump Boxes?	wshaw	So much gear, so little time!	7	6th March 2008 06:53 PM
Channel direct outs vs. sub group outs	Joemamma	So much gear, so little time!	12	27th May 2007 03:12 AM
Mixer with direct outs?	Janesaid2me	Low End Theory	13	11th April 2007 09:40 PM
Does Ptools require direct outs to sound good?	FOURTHTUNZ	High end	37	22nd January 2003 09:30 PM

2nd May 2008, 07:39 AM	#1
G0G0MRM0J0 Gear interested Join Date: Jul 2006 Location: Nashville, TN Posts: 14	RCA Direct outs... low levels to PT... who knows some good bump boxes? The current setup I'm using involves a DIGI 002 with PT LE, and I'm running an older analog console w/ direct outs 1-16 running to my interface, adat converting for 9-16. The console is a Panasonic Ramsa WR-T820B, and it has RCA direct outs. I'm not getting unpleasant results tracking with this console, although I am not receiving adequate levels to Tools. This sort of thing really bothers me, as often times my meterage inside of Tools isn't very shy of half way, with faders at unity feeding my D.O.'s. I was pondering the idea of finding 20 channels (yes, odd number, but the # of channels this ramsa console has) of -10 to +4 conversion... but such a thing to my knowledge would only be a custom job. I like the sound of my console and it serves its purpose well, but I think a problem of this nature forces me to consider scraping this model completely and finding an alternative console. I mean... I could get better levels using a mackie 24/8.... but that's really not any fun. Any suggestions???? I mean... a bump box is one thing... but 20 channels? The group outs and sends are all RCA as well. Thanks, Jules

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

20th June 2008, 02:22 PM	#2
drpat Gear Head Join Date: Mar 2005 Posts: 63	Hi Jules, That console has a switch on the buss cards to convert it from -10 to +4 level. You'll need to lift the master section to get to them...

23rd June 2008, 09:29 PM	#3
G0G0MRM0J0 Gear interested Join Date: Jul 2006 Location: Nashville, TN Posts: 14	Man.... Looks like I'll have to perform surgery on her. This is exciting though. I didn't think there would be a switch, since I've never seen a manual or the inside of her. Wow. If this works out I'll let you know. Thanks! -Jules