Gearslutz.com
All Advertisers

Go Back   Gearslutz.com > The Forums > So much gear, so little time! > Sub forums > Tips & Techniques

Notices

 
 
Article Tools Search this Article Rate Article Display Modes
  #1  

Kenny's - Fatten Up Kick Drum

To fatten up a kick drum without adding EQ:

Use the signal generator to make either a 52Hz or 60Hz sine wave at about -6dB on an audio track.

Send the kick out to a buss prefader at 0dB.

Now put a gate on the Sine wave and have it be keyed by the buss.

Set the settings so that the tone peaks thru as tight as needed.

Just mix to taste.

Serves 8

________________________________________________________



Contributors:
Created by Kenny Gioia, 20th February 2008 at 02:43 AM
Last edited by Kenny Gioia, 20th February 2008 at 02:43 AM
1 Comments , 8998 Views
 

Bookmarks

Article Tools Search this Article
Search this Article:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
thread Thread Starter Forum Replies Last Post
Is that *your* kick drum? karatemanjohnny So much gear, so little time! 61 4th November 2008 04:24 PM
Kick Kick Drum Drum Flamm Flammmmm jho So much gear, so little time! 16 15th September 2008 02:06 AM
Help recording kick drum without a "traditional" kick mic PheelTheMusic So much gear, so little time! 6 15th February 2008 07:12 AM
Kick drum EQ Rednose So much gear, so little time! 36 2nd September 2006 12:02 AM
Kick drum EQ TonyBelmont High end 23 15th August 2004 06:25 PM


All times are GMT +1. The time now is 03:40 PM.

 
 
Powered by vBulletin®
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0