Kenny's - Ping Pong Panning Delay

Making a Ping Pong panning delay with feedback that disentegrates over time.
Make 2 mono Aux's.

Pan Aux 1 Left and Aux 2 Right.

Set Aux 1's input to bus 1 and
Aux 2's input to bus 2.

Put a mono Medium or Long Delay Plug in on both aux 1 and 2. About 300ms.
No Feedback.

Put the Hi freq cutoff about 3Khz on both

Now on aux 1 set up a send for bus 2
Now on aux 2 set up a send for bus 1

Set both sends to about -8db
(This is your feedback level adjustment)

Now use bus 1 for your Ping Pong panning delay and it should pan and filter down each repeat.

For a more dramatic effect. Ad an eq in the second plugin slot on aux 1.
Set that eq to rolloff Lo's & Hi's and boost some 1Khz.

This will make every repeat thinner than the previous one. You can also add the Sansamp so that each repeat gets more distorted. Or Autotune so that each repeat gets more In tune? (I haven't tried that)

It seems like alot of work but if you just add it to your template like I do It's painless. Also add some reverb to the returns.

________________________________________________________