Gearslutz.com

All Advertisers

		Gearslutz.com > The Forums > So much gear, so little time! > Sub forums > Tips & Techniques
Power adapter (wall wart) matching

Tips & Techniques

Mark Forums Read

Search this Article

#1

Power adapter (wall wart) matching

If you don't have the wall wart that "came with" your unit and you want to know if a substitute adapter will work:

Match voltage requirement. Exceed current requirement.

thanks to Zemlin

Contributors: Jules	Created by joeq, 11th January 2008 at 01:37 AM Last edited by Jules, 11th January 2008 at 02:28 AM 2 Comments , 1061 Views
Discussion

Bookmarks

« previous article | next article »

Article Tools	Search this Article
Show Printable Version Email this Page	Search this Article: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dbx 290 Reverb - unable to find the unusual power adapter(din alike) it requires	Julien	Low End Theory	1	7th January 2008 02:07 PM
Buying a Phantom power to T power adapter on ebay	rackdude	So much gear, so little time!	0	12th December 2007 03:18 AM
Choosing a matching sub	reflekshun	Low End Theory	3	4th December 2007 05:58 AM
Impedance transformers for matching cabs and power amps	blueman	instruments, guitar, bass, amps	3	3rd March 2007 11:07 AM
Alesis DM5 power adapter, how many mA?	blackcom	So much gear, so little time!	2	7th March 2005 11:17 AM

All times are GMT +1. The time now is 06:26 AM.