| My diy acoustic panel build
Since I've learned a lot from gearslutz and frequent the site on a daily basis, I figured why not post what projects I have going on. And I would like some feedback if you have any constructive criticism... So here we go.
I'm building 2'x4' acoustic panels for my home studio. I'm using Roxul Safe'n Sound 3" deep insulation. Which I had to order from Lowes, since no one locally carried it. Why did I choose that? Well after doing a lot of research and being on a limited budget, the 8 pack for around 50 bucks was a good deal to me.
So while I'm waiting on the insulation I wanted to get the frames built. Since I could build up to 8 panels, after doing some calculations and sketches, I bought 12 - 1"x3"x8" furring strips, which was around 45 bucks for all of them. I also purchased braces to hold together the frame more. I attached the wood together with brad nails and wood glue. My next step is the insulation and fabric I believe. I'll post more pics when I get them done! Feedback is appreciated.
Nick
| 
New Reply 
Facebook
Twitter
LinkedIn
