need a little treatment help pics included

[LHOTLseven40]

im in the process of treating the control room im having a few difficutlies as far as placing treatment due to the glass and not wanting to limit to just the corners for a room of this size ... the rooms double wall double dry wall with sheetblock then 1/2 thick paneling over everything ... ive taken care of the first order reflections as well as started a 4" cloud absorber for above the mix position and 6 2'x4' 4" thick traps for the side walls

the room dimensions are

front wall 120"
rear wall 122"
depth 13'9"

celiling height front 107"
rear 109"
any suggestions on the traps for the front and back of the room would be appreciated

[Glenn Kuras]

For the window, if you need panels there you could use stands. Here is a general layout for acoustics.
GIK Acoustics: Room Setup

[jwl]

Definitely get some bass trapping in there.... the tighter the room in terms of soundproofing, the greater the need for bass trapping (since less bass is escaping the room, more of it lingers in the room causing problems).

Agreed with Glenn you can try to build stands that allow you to move them away from the glass when needed.

Also, looks like you could get quite a few traps up in the wall/ceiling corners, or even on the wall/floor corners under the window and behind the console. Get as many as you can in there.

[LHOTLseven40]

Originally Posted by jwl

Definitely get some bass trapping in there.... the tighter the room in terms of soundproofing, the greater the need for bass trapping (since less bass is escaping the room, more of it lingers in the room causing problems).

Agreed with Glenn you can try to build stands that allow you to move them away from the glass when needed.

Also, looks like you could get quite a few traps up in the wall/ceiling corners, or even on the wall/floor corners under the window and behind the console. Get as many as you can in there.

im definitly doing behind the console the and the corners in the front with a cloud above the wall mounted tv..... and the corners in the rear as well as the whole celing and a few going parallell to the speakers along the celiling

and for the stand if i make a 4"thick bass trap on the 5x6.5 foot office divider a foot off the glass

thanks for the help now lots of 703 wood and fabric.....