Flooring question

[seen-da-sizer]

Originally Posted by Jens Eklund

Repost your graph (and perhaps in a new thread) using higher resolution and an appropriate scale or just post the impulse (as wav/aiff) so other can look at it.

I will do.

Originally Posted by DanDan

REW will work fine if you use the onboard Apple I/O which is usually of very decent quality but certainly good enough for the job at hand.
Again 1000mS and -45dB to begin with.

Thanks Dan. I didn't had time to hook-up the Apple I/O last night, and the measurements have been just junk in REW. And I had a bad cable in the setup. I will be trying again tonight with Apple I/O and/or REW running on PC.

Now as it is with all my junk in the room, any measurements will be off the charts. There are too many boxes that resonate with the impulse, making delays beyond the 1 second. But I am excited to see what changing the floor does to my small room.

[DanDan]

seen, I am experimenting with REW myself. Didn't get anywhere with SoundFlower. It seems OK to use the Digidesign HD192 for output, the studio norm, thus no rewiring.
In Sound Preferences, and Audio Midi Setup, chose your Interface as the Default Out and Apple Line Input for In.
DD