Gearslutz.com

All Advertisers
Go Back   Gearslutz.com > The Forums > Studio building / acoustics


New Reply New Reply Thread Tools Search this Thread
Old 7th December 2008   #1
Gear interested
 
Join Date: Dec 2008
Posts: 1

Thread Starter
Unfinshed Basment and I need help with tracking room and control room design.

I need some help.

I have an unfinished basement and want to build a tracking room and a control room. I have searched many of the threads and have found that there are a lot of people on here who have great knowledge about acoustics and design. I wish to take advantage of these skills. If you people can give me some advice on how to construct this studio it would be great.

I'm looking to build a room inside a room (I need to cut down on the sound to keep the neighbors pleased.) Possible a floating floor. The main problem I run into is the low ceiling. I have 7' 9" until the rafters and then a foot more of space. But the other foot can't really be used cause that is where all the pipes and wiring is located. I want to be able to record drums. So... If anyone has any ideas for dimensions, where to build bass traps, how to optimize my space. etc. That would be great

Any ideas or suggestions are welcome

Thanks

Kevin

PS. I quickly drew out the dimensions and am posting it. If you have any questions please ask
Attached Thumbnails
Unfinshed Basment and I need help with tracking room and control room design.-downstaris-sketch.jpg  
kevintame is offline   Reply With Quote
Old 20th November 2010   #2
Lives for gear
 
jhbrandt's Avatar
 
Join Date: Feb 2009
Location: Jakarta, Indonesia
Posts: 2,532

Send a message via Yahoo to jhbrandt Send a message via Skype™ to jhbrandt
Hi Kevin,

Welcome to GS.

You can raise the ceiling by lowering the floor. Digging down the basement floor and pouring a new slab would solve this problem. - How much did you want to spend on this project?

I would recommend a minimum ceiling height for recording drums to be 9 feet. At 9 feet, you will need an absorptive ceiling over the drums. So, if the ceiling is lower, I would recommend heavy trapping above.

If you didn't need the isolation, you could fill between the joists with building insulation (attic blanket) and cover with fabric. - This will be close to 9 feet to the hard 'ceiling' surface (bottom of floor above) with heavy trapping.

You do not need to float your floor. You are in a basement. The slab is on the earth which is a good damping material.

Cheers,
John
__________________
John H. Brandt
Recording Studio Design/Consulting, Acoustics, & Electronics
Jakarta, Indonesia
go to http://jhbrandt.net & sign up for my free newsletter "Studio Design News"

"Twenty thousand dollars worth of Snap-On tools does not make you a Professional Diesel Mechanic"
jhbrandt is offline   Reply With Quote
New Reply New Reply Submit Thread to Facebook Facebook  Submit Thread to Twitter Twitter  Submit Thread to LinkedIn LinkedIn 



Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread starter Forum Replies Last Post
slanting glass between control room and tracking room... jnobucks Studio building / acoustics 14 17th June 2010 04:14 PM
Car Shaped Control Room Design sethbrand_12 So much gear, so little time! 4 5th October 2007 07:47 PM
Control room design ! What is the best room you worked in ? pw8888 High end 31 8th February 2007 06:02 PM
Control room combined w/ tracking room...good idea? centurymantra So much gear, so little time! 12 2nd April 2006 05:51 PM
Control Room Wall design lukejs So much gear, so little time! 13 13th March 2006 02:29 AM


All times are GMT +1. The time now is 03:32 AM.

 
 
Powered by vBulletin®
Gearslutz.com Limited - UK Company Number 7597610.
Registered Office: 35 Ballards Lane, London, N3 1XW.

SEO by vBSEO ©2010, Crawlability, Inc.